Am I doing something wrong . they say it will fit right under derby cover . Not mine . Derby cover won't go back on . Anyone Install one of these?

 

When I ran a VP, I had to use a derby cover spacer ring to keep my cover. https://aim-tamachi.com/collections/...asket-hardware

 

. Thanks Again Dawg. Been thanking you for years. Lol

 

Some derby covers will work with the variable pressure clutch and some need the spacer to get enough clearance.

 

I'm sure there was something about that in the instructions I got with mine!

 

If you go to their website- it shows which ones need a spacer

 

The first derby cover I had needed the spacer. I’ve since changed derby covers so I no longer need the spacer on the bike. What I do use the spacer for is a template to mark Cometic derby cover gaskets for cutting out some of the gasket to get the clearance needed for the VPC. I also bought a small heavy duty curved scissor on eBay for cutting the gasket which is made of metal covered in gasket material.

 

I'm open to changing derby covers which one you get?

 

My Wife’s 2006 Ultra has a HD flames derby cover.

My 2012 Ultra has a custom derby cover from a guy no longer in business.

Both fit variable pressure clutches without spacers.

My HD variable pressure clutch came with a paper cut out template that you hold up to the back of the derby cover to check for clearance.

Im probably not much help.

 

If you use a spacer- the floor board probably wont fold up