Rushes rattling
My right side slip on is rattling at idle. If I put my foot on it no noise. Could the baffle be the noise?
|
RE: Rushes rattling
Pull the baffle out and bend the inside end out just a hair until you get a tighter fit to the pipe.
|
RE: Rushes rattling
While the pipe is cool. check to see if you can rotate the muffler. Alot of time the torca clamp will not re-tighten after it has been used and you will need a new one. you can get them for about 10 bucks
|
RE: Rushes rattling
Also lubricate (I usetri-flow)the rubber on the rear mounts, they can rattle and make a helluva racket.
|
RE: Rushes rattling
JB Weld?[sm=icon_rofl.gif]
|
RE: Rushes rattling
Noticed the same thing. I had to re-tighten mine after about 100 miles, haven't had a problem since.
|
RE: Rushes rattling
just couldn't hold it back, could ya??:D
ORIGINAL: HarleyWood JB Weld?[sm=icon_rofl.gif] |
RE: Rushes rattling
I suspected the torca clamps before when it was poppin'. I have asked at every HD dealer in town 3 of them. They have to look up the part number and never have them in stock. That leads me to believe that they don't get replaced that often. I will pull the baffle and see if its loose fit. What you guys bending them out with?
|
RE: Rushes rattling
I had a 69 beetle that someone JB Welded a crack in the exhuast. I bought it in Feb. it held till June.
ORIGINAL: HarleyWood JB Weld?[sm=icon_rofl.gif] |
RE: Rushes rattling
I pulled the baffle out today. Over half of the packing is burnt away. I have put about a thousand miles on them since I put them on two months ago. I got them from the dealer so they will check with Epiflex Mon about replacement.
|
All times are GMT -5. The time now is 10:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands