How to remove plastic cover from RG headlights
 

Hey I need a little help. I am detailing out a friend’s Road Glide and I don’t know how to remove the plastic bubble from the fairing in front of the headlights. It is terribly crappy on the inside and since I own a EGC I am not sure how to remove…
Thanks in advance for the help guys!

RE: How to remove plastic cover from RG headlights
 

There are 2 plastic tabs one on each side of the cover. But be careful the paint on that lip can be damaged real easy. I always go from the inside.
opps Nedster is right 4 tabs.

RE: How to remove plastic cover from RG headlights
 

it has 4 tabs that attach it to the fairing, you can use a small screw driver wrapped in tape, or some guys use popsicle sticks to avoid scratching or chipping the paint. Just pry gently near the tabs and it should pop out

RE: How to remove plastic cover from RG headlights
 

I thought I seen 4 small indentations in the bubble… Two on top and 2 on the bottom… So pry the outer edges of the bubble out of the fairing? Sounds easy.
2 on the bottom… So pry the outer edges of the bubble out of the fairing? Sounds easy.