Sig picture
 

For the life of me I can't seem to post my sig pic! On the edit page it has the picture but when I post as you can see there is no picture. Can someone please help!

It took me forever. I finally did a search and came up with the instructions.

You know, I thought I'd tried everything...it shows up in preview when I go into User CP but it doesn't show up when I post in a thread...I'm about to give up and drop back and punt!

If the picture shows up on your "Edit Signature" page, try putting the following in the box where you edit:

[SIGPIC][/SIGPIC]

Hope this helps

Well GAAAAAR-LEEEE...THANK you for that little tip. Seems to have been the missing link!

I found that in someone's post a few days ago but couldn't find the link to post here. Thanks to whoever it was!

Yeah, it took me a while...you need to go to your profile and edit options, change setting to one of the other choices...

Go up to where it says "User CP"....On the left side of the page find where it says " signature edit. Set your picture. *****here is the tricky part. *****
You have to click on where it says " Incert picture" ..than save Changes

I finally got it to work, but for the life of me I don't know if I could do it again!!

This is what I did...

1) Take whatever pic you want & resize it to 400 x 300 pixels. After you resize it, save it somewhere your computer.
2) Open a photobucket page & save it there too.
3) Copy the 2nd adress link (Say's "direct link") under the pic from photobucket
4) Go to the "user cp" in H-D forums & select "edit signature"
5) In the white box under where it says "edit signature" paste the address you copied from photobucket in there
6) In the beginning of this address, type [SIGPIC] and at the end of this address type [/SIGPIC]
7) Now scroll down a bit on that same page to where it says
"Option 1 - Enter the URL to the Image on Another Website" and in this white box browse your computer to where you have the pic (in 400x300 size) and put it here.
8) Now click "save signature" at the bottom of the page and you should be all set.