Gents, can someone tell me if the stock wheels from a 2006 street glide will fit on a 2002 road king??

thanks
mike

 

Yes they will.

 

rear wheel will need bearing change to 3/4 " for 2002

 

will 2011 rode glide wheels fit a 2002 ultra? rg wheels = frnt 19 3.5 rear=16 5.00

 

From what I've read you may be able to fit the front, but the rear will not bolt in. The 09 and later bikes have a wider swingarm for that wheel, so it will need some effort and determination to fit.

 

is it possible to change my 02 swingarm, to an 2011,. also up to what year could i use for the rear of my bike..

 

I put '07 SG wheels on my '02 Glide with no bearing changes. Straight bolt on.I believe they changed the bearing diameters from 1 inch to 25mm in 2008. The axle diameter was changed to 1" in '02. Before that they were 3/4".

 

Up to 08 will fit, from what I can tell. I have an 07 in my 1990 Evo. Later swingarms are wider to take the wider rear wheel and I haven't seen news from anyone fitting one of those yet. I don't believe it will be a simple bolt-in.

We need someone to look into this for us.....

 

thanks for getting back on that swing arm, got a couple of people working on it for me. as far as fitment.. i will give feed back as soon *** i get it, im new to this harley game but i do attend to get with it. ive been on the jap bikes since very young, now trying to chill and have a nice bike with some value!!!! i have a lot of stuff to do with this harley, 1st i had to tackle the look, its already nice but needed a meaner look, i thought the road glide wheels would set it off, i already had them custom painted, to find out the rear won't fit, thats what you get when you listen to someone and not doing your home work, well ok they got me! now hopefully i got you guys, all you in the fourm who have ,fast bikes, good looking bikes,and most important those of you, who actually ride your bike.. i need all of you, help me get on board and get my damn bike together.... ill give just a small list, #2 power, im just coming off a zx10, 999cc... now i have an 88, lol. ok, ok, so should i do 95 or 110, i dont ride fast all the time but im into larger woman so id need to pull them around, #3 exhaust need her to breathe, i like the 2 into 1... need advice on evrything, hopefully i set a spark to you guys, dont be shy step up, and lets see what you got...

 

any news yet on whether the 09 or newer swingarm will fit an 08 and older bagger ???