09 FLHX rear fender on my 08 FLHX for the 180 install
#61
01-22-2014, 05:20 PM
6th Gear
Join Date: Jan 2014
Location: SE Michigan
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Very nice! I have been researching the 180 rear tire on an '08 for a while and you make it seem so much more simple.. I do happen to live in SE Michigan and would like to see if your still up for doing the metal work part of it (don't have a wire feed welder). Any help is greatly appreciated!
Thanks,
Ian
Thanks,
Ian
#62
01-22-2014, 06:31 PM
Very nice! I have been researching the 180 rear tire on an '08 for a while and you make it seem so much more simple.. I do happen to live in SE Michigan and would like to see if your still up for doing the metal work part of it (don't have a wire feed welder). Any help is greatly appreciated!
Thanks,
Ian
Thanks,
Ian
Rick
#63
03-09-2014, 06:11 PM
Stage I
Join Date: Sep 2012
Location: East Coast
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
#64
07-29-2017, 07:57 AM
Stage I
Join Date: Jul 2017
Location: Manvel, Tx
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
#66
03-12-2024, 11:53 AM
6th Gear
Wheel centering
this is a 2000 RKC, my winter project, I used a chain drive with a offset front sprocket .500 and a rear sprocket spacer of .625 on a 180/55/18 in wheel. took the 09 fender and made the same mod to it and also had my fab man make me a metal fascia. he is willing to do others also. the bike is now at the paint shop getting a custom paint. here are some pic's
Thread
Thread Starter
Forum
Replies
Last Post
