Licence plate bar: remove vs. replace ???
#1
Licence plate bar: remove vs. replace ???
In the attached picture you can see the "U" shape bar that holds the licence plate support. Is it somehow possible to replace it or to remove it?
If it can be replaced please let me know the prat number and/or producer. If not give me an idea to relocate the licence plate somewhere...
Thanks!
If it can be replaced please let me know the prat number and/or producer. If not give me an idea to relocate the licence plate somewhere...
Thanks!
#3
#4
Not sure if this would fit your model, buy I bought a signal bar and plate bracket from a newer Road King off of Ebay and mounted it on my Ultra after I removed the tour pack. It has an integrated plate light and puts the license plate below the signal bar and above the rear marker light. You can find these frequently on Ebay as used or new take-offs.
#5
...you can buy a chrome plate mount for about $20 which will undermount as above, but you keep your stock signal bar/taillight.
plate bolts with leds are about $12 and easy to wire up.
some guys remove the U, and put aux lights in the holes
the 09+ roadking signal bar, I believe will not mount up to the narrower 08 and earlier fender
( I use the rk on my 09)
mike
plate bolts with leds are about $12 and easy to wire up.
some guys remove the U, and put aux lights in the holes
the 09+ roadking signal bar, I believe will not mount up to the narrower 08 and earlier fender
( I use the rk on my 09)
mike
Last edited by mkguitar; 08-18-2013 at 02:19 PM.
#6
Ya can just cut it off or get something like below to remove the bar.
http://www.ebay.com/itm/License-Plat...1bd6fb&vxp=mtr
My RK setup
http://www.ebay.com/itm/License-Plat...1bd6fb&vxp=mtr
My RK setup
Last edited by 0ldhippie; 08-18-2013 at 05:12 PM.
Thread
Thread Starter
Forum
Replies
Last Post
rgardjr
Motorcycle Parts For Sale-Misc. Parts
6
03-13-2008 12:34 AM