Changing a starter......Big job?
#1
Changing a starter......Big job?
I bought a chrome starter for my '07 RKC. It's due for delivery tomorrow, Wednesday, October 4th. Is it a pretty good job to remove the stock starter and replace it with a chrome one, or should I let the dealer do it? I know about disconnecting the battery first.
#2
#3
couldn't see in your pic if you have true duals or still have the crossover pipe cuz your leg is in the way.
If you have true duals, it's a 15 minute job to change out the starter. I know cuz that's how long it took me to pull my starter to get to my vehicle speed sensor that is beneath my starter.
If you still have the crossover pipe, then you have to pull your exhaust before even thinking about getting your starter. Actualy that's not that difficult either.
Forget the dealer, do it yourself!
just my opinion
If you have true duals, it's a 15 minute job to change out the starter. I know cuz that's how long it took me to pull my starter to get to my vehicle speed sensor that is beneath my starter.
If you still have the crossover pipe, then you have to pull your exhaust before even thinking about getting your starter. Actualy that's not that difficult either.
Forget the dealer, do it yourself!
just my opinion
#4
#6
#7
There's a Service Bulletin on the 2006-2007 starter mounts for the Touring models. Since you changing the starter, only the torque changes would apply:
Install starter. Clean starter fastener threads. Apply LOCTITE
243 (blue) to threads of starter fasteners. Tighten
fasteners to 25-27 ft-lbs (33.9-36.6 Nm).
7. Update the starter mounting bolt torque to 25-27 ft-lbs
(33.9-36.6 Nm) in the:
● 2006 Dyna service manuals
● 2007 through 2009 Dyna, Softail and Touring service
manuals
Install starter. Clean starter fastener threads. Apply LOCTITE
243 (blue) to threads of starter fasteners. Tighten
fasteners to 25-27 ft-lbs (33.9-36.6 Nm).
7. Update the starter mounting bolt torque to 25-27 ft-lbs
(33.9-36.6 Nm) in the:
● 2006 Dyna service manuals
● 2007 through 2009 Dyna, Softail and Touring service
manuals
Trending Topics
#9
Can anyone confirm that the High Performance Starter 1.4KW (31335-03A) will fit a 2008 Ultra Classic? The description on the website says:
Fits '94-'06 Softail® and Touring, '94-'05 Dyna® and '99-'00 FXR models.
It doesn't mention 08.
Sorry if this is a stupid question, but I want to be sure before I order it.
Thanks.
Fits '94-'06 Softail® and Touring, '94-'05 Dyna® and '99-'00 FXR models.
It doesn't mention 08.
Sorry if this is a stupid question, but I want to be sure before I order it.
Thanks.
#10
Can anyone confirm that the High Performance Starter 1.4KW (31335-03A) will fit a 2008 Ultra Classic? The description on the website says:
Fits '94-'06 Softail® and Touring, '94-'05 Dyna® and '99-'00 FXR models.
It doesn't mention 08.
Sorry if this is a stupid question, but I want to be sure before I order it.
Thanks.
Fits '94-'06 Softail® and Touring, '94-'05 Dyna® and '99-'00 FXR models.
It doesn't mention 08.
Sorry if this is a stupid question, but I want to be sure before I order it.
Thanks.
harley-davidSon® genuine high
Performance 1.4kw Starter
This starter offers both great styling and increased performance,
providing 15% greater torque than the stock replacement
starter. Engineered and tested by Harley-Davidson from
the ground up, this starter offers unparalleled reliability and
durability. No special battery or battery cable requirements.
Fits ’06-later Dyna® and ’07-later Softail® and Touring models.
31619-06a Black Finish. $424.00
31621-06a Chrome Finish. $525.00