23 inch front wheel
Will a 23" wheel fit on a stock 2010 Bagger with just fender mods or do you need to extend the front end out some? The only bikes that I have seen done with that wheel are the Yaffe and Sinister bikes with a cut frame. I dont really want to cut the fame on my 2010 yet but would like to run a 23
|
you need a new front fender
|
Originally Posted by Pork-Chop
(Post 6463242)
you need a new front fender
Is that it or am I going to have to change other things? |
Probably also gonna need a tire to fit that rim......:icon_laugh:
|
You'll at least need to lower the front end or it will handle & look like sh#t, not sure if the fender will hit the trees or frame or not, but I'm guessing it might. Not my cup of tea, but women say you can never go too big.
|
1 Attachment(s)
You only NEED to raise the fender, it would help to lower the front end as it raises up quite a bit with the 23.
|
Originally Posted by hog-doc
(Post 6463702)
You only NEED to raise the fender, it would help to lower the front end as it raises up quite a bit with the 23.
hog doc is that the stock front end on that bike or is it extended? |
i have a 23/ 18 combo. Did not rake it did not lower it or anything else. rides great. But does sit lower on the kick stand because its an inch taller than stock because of the rim.
|
23" wheel
i have installed a 23" wheel. i am keeping the stock fender because i really like the look of it. does anyone sell a spacer to lift the fender. 1998 road king flhrp
|
You could change to raked triple trees and improve the handling and stance some what. I think Yaffe makes them.
|
All times are GMT -5. The time now is 06:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands