|
I need to be more clear. I meant the bracket to bolt the rear of the seat to the fender. The seat has 2 threaded holes, which seems to me the bracket should be a T shape. 2 holes for the seat mount and 1 for the fender mount. Sorry for the confusion.
|
The holes aren't threaded on the seat bracket.
If you take your seat off, you should have 2 threaded studs sticking up from your fender. The bracket for the seat goes over those studs, then the threaded cap nuts that come with the seat tighten down over the studs. Just like a Mustang solo, or a Corbin solo. The cap nuts have an indent in them that the pillion seat bracket slides into. Then you just attach the back of the pillion with the 1 screw in the back. |
Love mine-- use it during summer when the TourPak is off.
|
Originally Posted by Watch Guy
(Post 6569154)
I was trying to get a lower seat height when I bought it but found it is the same as the stock seat. It's very comfortable though but I did not ride with it. I installed it, sat on it and took it off. Instead I went to a sundowner and now have a C&C solo. Wanna buy the Signature seat?
|
| All times are GMT -5. The time now is 12:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands