How too tell if you have abs
hi just wondering how you can tell if bike has abs brakes? dealer siad i did but i am not sure? was researching handle bar replacements it siad i would need a longer brake line and it ties in under the seat? but from looking at mine it looks like it runs down to the junction at the front forks? it is a 2009 flht standard. thanks for the help
|
There will be an ABS light on and flashing when you start your bike until you roll about 10 feet.
|
You will see a wire running with the brake hose down to the left side of the front wheel.
|
Look on the left side of the front wheel hub. If it has a black band, it has ABS. At least that is what my local dealer told me when I was looking at new....
|
If you have ABS there will be an extra wire that runs down with the left side brake line on the front wheel that connects with the sensor. Another way is to pull the right side cover, if you have a large aluminum block with all of the brake lines running to it. Also when you first start the bike the ABS light will come on and stay on till you are up to about 8 miles an hour. The last one is the ABS system check.
|
Stand on the rear brake at 30 mph, it it refuses to lock up you have ABS, if it locks up, you dont!
|
like sporacer said, it'll be a wire running to the hub on the left fork leg
|
Just look at the front wheel, right side has a metal spacer, left side will show a black rubber spacer....
|
I found out the way hog doc is talkin bout.... Wasnt askin but did find out...
|
ok thank you very much, i will head to the garage and check it out. thanks again
|
All times are GMT -5. The time now is 04:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands