|
https://cimg4.ibsrv.net/gimg/www.hdf...1dbd768ffe.jpg
You get a pretty good look at the rear in this pic |
That's a very nice and clean ride, with the right touch of bling.
|
Originally Posted by bhm07
(Post 13856133)
https://cimg4.ibsrv.net/gimg/www.hdf...1dbd768ffe.jpg
You get a pretty good look at the rear in this pic |
nope stock 2010 painted badge
|
Originally Posted by scootertex
(Post 13856389)
That's a very nice and clean ride, with the right touch of bling.
|
1 Attachment(s)
My Road King Classic is now a Classic Road King. All new clothes and shoes!!
SC |
https://cimg9.ibsrv.net/gimg/www.hdf...6fa001ca1c.jpg
Shows how I laid out Kenwood Radio, Amp, Speakers, also I added two 12 volt Plugs (white wire) to be able to charge cell phone, etc. https://cimg3.ibsrv.net/gimg/www.hdf...07049a4aed.jpg I used Heavy Wire to power components. The Red/Blk heavy wires going down thru rubber grommet is the quick disconnect https://cimg8.ibsrv.net/gimg/www.hdf...f903204d1c.jpg The Rockford Fosgate's small size works great and you only need Velcro to mount it on top of radio https://cimg5.ibsrv.net/gimg/www.hdf...09720e9512.jpg I love the Reckless Fairing. Looks great ,Gel coat only https://cimg8.ibsrv.net/gimg/www.hdf...1386ec4bbe.jpg You can see the large Terminal block for the main power wire that distributes power to everything |
Originally Posted by rod123
(Post 13859149)
https://cimg9.ibsrv.net/gimg/www.hdf...6fa001ca1c.jpg
I love the Reckless Fairing. Looks great ,Gel coat only |
Originally Posted by DJFriar
(Post 13859664)
Could you share a little bit about how easily disconnectable it is? I love the fairing idea, but I would want to remove it easily when desired. This pic above seems to show it being quick detachable like the windshield is. How'd you run the wires?
It is like the Battery Tender connector..just run a new wire from your battery,go under the gas tank, to the area around steering neck with these 2 wire type connectors...buy a long one so you have no splices.. the short piece (coming from the power connector inside fairing) goes thru rubber grommet makes connection just outside the fairing..It is the only connection...other than the windshield rubber pieces the fairing brackets slide into,,,,,but I'll tell you I loosen my Passing lights and move them down onto a blanket on the front fender when I make a switch from one setup to another... |
Just cleaning her up a bit. I've had the bike 3 years now. Did motor work awhile back. Now upgrading this plane Jane FLHR with some modern pieces, LED lighting, 07' swingarm, mirrors, wheels and rotors, Brembo front brakes, new cables, etc
https://cimg6.ibsrv.net/gimg/www.hdf...8967803c52.jpg https://cimg6.ibsrv.net/gimg/www.hdf...ba51897a8a.jpg |
| All times are GMT -5. The time now is 06:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands