Kuryakyn Panacea tail light not working
#1
Kuryakyn Panacea tail light not working
As I was riding home from work today, a fellow rider was kind enough to let me know that my Kuryakyn Panacea tail light wasn't working - the driving light was lit, but the brake lights weren't coming on. When I got home I took the seat off and checked the fuses and all the connections, but nothing was blown and all connections were tight. Luckily I still had the factory light, so I was able to reinstall that (which works perfectly) so I can ride in tomorrow.
Anyone have any ideas what might be causing the problem? I'm planning on calling Kuryakyn tomorrow, but I'm guessing they're going to tell me it's a bad control module.
Anyone have any ideas what might be causing the problem? I'm planning on calling Kuryakyn tomorrow, but I'm guessing they're going to tell me it's a bad control module.
#2
#4
I've got an '07. I installed the lights 13 months ago, and have had zero issues until yesterday. I was on the phone with Tech Support this morning, and they suspect it's the control module. I have one on order from Eastern Performance, cost me $29. Kuryakyn wanted $70 for the module.
#5
Kuryakyn Panacea tail light issue resolved
Thought I'd post an update on my tail light issue. I received the new control module from Eastern Performance yesterday and plugged it in to see if that was my issue - it was, and I'm happy to say my Panacea tail light is now working normally again.
For those who've had the same problem, the P/N you'll need is 604886K Plug In Panacea Master Control Assembly. Kuryakyn wanted $70 for it, I got it for $29 from Eastern Performance.
For those who've had the same problem, the P/N you'll need is 604886K Plug In Panacea Master Control Assembly. Kuryakyn wanted $70 for it, I got it for $29 from Eastern Performance.
#6
Thread
Thread Starter
Forum
Replies
Last Post
rockon
Dyna Glide Models
2
01-16-2009 01:43 AM