Rear turn signal
#1
Rear turn signal
2011 Electra glide classic, I have detachable tour pack and looking to relocate license plate below tail light. I have the tag bracket for FLHX and tail light w/o window. My question is does the h-d rear bullet light have the holes for the bracket and license lamp to bolt in or do I need to order the one for the 2009 and older street glide? Or any other ideas.
#2
As far as I know, you'll have to get a turn signal bar from any Street Glide, Road Glide, or Road King with the license plate lamp already built into it as H-D's Bullet Rear Turn Signal Light Bar Kit (68617-04) doesn't include the license plate lamp. Be aware that if you choose to use the license plate lamp, it plugs into the auxiliary socket that your rear fender tip lamp is currently using so you'll have to do some wire splicing or choose which lamp you want to use. I'm currently going through the same conversion on my 2009 Electra Glide Classic and still figuring what I can and can't do so if anyone knows more, please correct me if I'm wrong.
Last edited by Chad1200; 01-17-2020 at 03:15 PM.
#3
That’s kinda that I had figured. I can’t find online if the street glide on comes with the bulb sockets and wiring on ronnies Harley parts find it has them listed separate so I’m assuming I’ll have to order it individual. I had looked at the soft break plate from jp cycles but i think the street glide parts would look better
#4
Thread
Thread Starter
Forum
Replies
Last Post
brute force
Touring Models
2
04-14-2011 05:18 AM
07RoadGlide
Want To Buy Motorcycles/Parts/Accessories
12
12-16-2007 09:27 AM