Wonder if this is better than the Jagg 10 row cooler??

 

What exactly is it you're looking to see? The install is fairly "straight forward", the Oil Filter Adapter portion of the install is basically the same as any other oil cooler.

 

I had the Jagg 10 row fan assited prior to the Reefer; it performed well. But I didn't like the voltage regulator sitting on top of it. The problem was it interfered with my 21" front wheel/fender.

 

Sorry new here on this forum..Cant see the install pics posted here yet...

 

Thanks for the info..Was looking at putting the Reefer on my Tri Glide...Been trying to research info now..

 

I wish I would of had this on my bike before I went to Sturgis this year. I was caught up in some serious stop and go traffic because I was riding in a group so I couldnt break off like I usually do when my bike gets hot. Primary got so hot that I had no clutch at times and the gas up there is not the best depending where you get it. My 107 is a strong motor but after this trip seems like I lost some power not sure why and hopefully its just my imagination. It does have a stock oil cooler which I have always questioned how well it works and after reading the different temps you guys are getting I will have a UltraCool before next summer.Thanks for the posts and great pics!

 

Thanks for the write up on this cooler.

And for the pictures.

 

If you end up not being able to see them email me and I'll email them back to you.

Pretty straight forward but it is comforting to see some pics at times.

No worries either, just email me anytime.

J

 

Esuomm1, good tech right up and the cooler. The UltraCool looks like a very good option to go with. In the image DSC06921.jpg, the steel braided hose running closest to the ground has a small kink in the bend.

 

Thanks..I ended up seeing the pics finally..Looks great...Looks like a nice install..
Quality looks great too..