handlebars and switch upgrades?
Thread Starter
|
Road Captain
Joined: Mar 2007
Posts: 541
Likes: 3
From: Houston
handlebars and switch upgrades?
Im about to order WO610 for my 98 Roadglide...
I have a 2011 brake master cylinder and lever...
Im going to upgrade to the 18" 2012 wheel and brembos...
my question is do I upgrade the clutch side to same years?
will it hook up properly?
will i need longer brake cables and clutch?
for being a 98 what years would be same switch housing and switches...mine are faded bad and someone put the chrome covers which is not my taste...
I have a 2011 brake master cylinder and lever...
Im going to upgrade to the 18" 2012 wheel and brembos...
my question is do I upgrade the clutch side to same years?
will it hook up properly?
will i need longer brake cables and clutch?
for being a 98 what years would be same switch housing and switches...mine are faded bad and someone put the chrome covers which is not my taste...
I just did the Brembo upgrade on my 2001 EGC. You need to get the newer master cylinder, brake lines, because your changing to a different grade of brake fluid. I also got the matching clutch handle and bracket, but for some strange reason, I couldn't get it to work properly. The clutch handle would not seat all the way when the clutch was not engaged. So I'm running the stock clutch perch and handle.
Thread Starter
|
Road Captain
Joined: Mar 2007
Posts: 541
Likes: 3
From: Houston
thanks...yeah i still have my old lines from my 2009 egc and have everything else...
i just want to upgrade everything at once when i take it off...
my 98 has a hard clutch also...so wouldnt mind that gettin a little easier also
i just want to upgrade everything at once when i take it off...
my 98 has a hard clutch also...so wouldnt mind that gettin a little easier also
Thread
Thread Starter
Forum
Replies
Last Post
