S&S Power Tune Duals installed with the Progressive Touring Link
 

I purchased the Duals and did not want to lose the Touring Link so this is what I came up with as a solution (hopefully).

This is for 08 and below only as I believe the 09 and up utilize a different mounting system.

Shot of the Link installed.
http://i39.photobucket.com/albums/e1...ps68ab2c82.jpg

The S&S mounting bracket measured and marked for trimming.
http://i39.photobucket.com/albums/e1...pse3ca4f18.jpg

Test Fit.
http://i39.photobucket.com/albums/e1...psda6a1d1d.jpg

Installed
http://i39.photobucket.com/albums/e1...ps512ec59e.jpg

Hopefully this will hold up.

Very nice, good job.
Let me know how you like the S&S power tune duals.
I've been thinking about that exhaust system.

I did something similar, only I used steel spacers I bought at Lowes. I really like the S&S pipe. I put a set of CVO mufflers that I recored with 2" fullsac baffles on for a sweet low rumble.

We still have a foot of snow on the ground so it will be a while before I get to try it out.....bummer.

Yea, I'm in Michigan and still have about 24" here. :-(