Klock Werks 6.5" dark smoke Windshield
 

6.5" Klock Werks dark smoke windshield for sale. 1996-2013 FLHT, FLHTC, FLHX, FLHTCUTG, FLHXXX fitment.
I bought this new for an 08 SG, used for short time then replaced with KW 8.5".
Like new condition.

Dennis Kirk pt # 23-3005 retails for $171, Klock Werks pt# 2310-0212 retail 180.

$100. OBO shipped, I'll throw in the OEM dark smoke shield.

Klock Werks contact info, 605-996-3700.

1996-2013 6.5" Klock Werks dark smoke WS
 

:icon_bump1:

hey. what is the measurement from middle of center hole to top of windshield in a straight line. thanks.

I think that is the 6.5 inches.

For 1996-2013 Klock Werks offered the 3.5", 6.5", 8.5" & 11.5" FlhT, Flhtc & Flhx.
My shield is the 6.5" Klock Werks part# 2310-0212.
Although it measures 7.5" from "center mounting bolt hole" to the top in a straight line it's considered 6.5" (from top of fairing to top of shield). But I recommend contacting Klock Werks @ 605-996-3700 for detailed info.

May be interested. How tall are you -- and what, if any, difference have you noticed in the 6.5" versus the 8.5"? Did you get too much wind in the face with the 6.5"?

Thanks in advance.

In my "opinion" (lol) the 6.5 looks better than a taller shield and provides a nice pocket of calm/light air with the "flip" deflecting wind up and over the head of a person 5'9" with plenty of room to spare, also deflects wind outward on each side. Several of our friends use this shield that are 6' with some taller.
No buffeting.
I suggest contacting Klock Werks @ getklocked.com or 605-996-3700 for more detailed info.

PM sent as I'm interested in taking it off your hands.

KW shield
 

Guys & Gals this ain't a BRAND new shield but it is in like new condition. It has been mounted and used for several months. I wouldn't hesitate mounting it on a new bike.
It has been covered in bubble wrap since I removed it and kept in an enclosed cabinet.
The only scratches I see are below the top of the fairing where the fairing presses against the shield when mounted (tightening the mounting screws causes this, unavoidable). This will happen to all new shields when mounted. Cant be seen when mounted.
I'm discounting this shield over half the retail. I must have $75. net after shipping & payment cost. That over a $100 discount.
Thanks for your interest.
Mike