Touring Parts This is the place to post your Touring Parts for sale. DO NOT POST WTB THREAD HERE.

58mm SE Polished Throttle Body Assy Complete

Thread Tools
 
Search this Thread
 
  #1  
Old 09-26-2011, 03:55 PM
Nick-O's Avatar
Nick-O
Nick-O is offline
Tourer
Thread Starter
Join Date: Feb 2010
Location: MCAS SC
Posts: 370
Likes: 0
Received 2 Likes on 2 Posts
Default 58mm SE Polished Throttle Body Assy Complete

Selling fully polished and complete Screaming Eagle 58mm Intake assembly. Has had very little use. Just removed from 2007 103". Includes the polished alum throttle body assembly, intake manifold, flanges and seals, 2 SE 4.1 hi flo fuel injectors, matching SE air filter and 58 mm backing plate, with all hardware. System complete and ready to bolt on. Have all part numbers if reference needed and more photos as needed.

$425 shipped lower 48
 
Attached Thumbnails 58mm SE Polished Throttle Body Assy Complete-imag0001.jpg   58mm SE Polished Throttle Body Assy Complete-imag0004.jpg   58mm SE Polished Throttle Body Assy Complete-imag0005.jpg   58mm SE Polished Throttle Body Assy Complete-imag0008.jpg  
  #2  
Old 09-29-2011, 11:43 AM
Nick-O's Avatar
Nick-O
Nick-O is offline
Tourer
Thread Starter
Join Date: Feb 2010
Location: MCAS SC
Posts: 370
Likes: 0
Received 2 Likes on 2 Posts
Default

Still available, great deal. Will wait a couple more days before listing on ebay.
 
  #3  
Old 09-29-2011, 08:19 PM
Craig C.'s Avatar
Craig C.
Craig C. is offline
Advanced
Join Date: Apr 2008
Location: Dewitt, MI
Posts: 90
Likes: 0
Received 0 Likes on 0 Posts
Default 58mm t.b.

Hey Nick-O, I am looking for a Throttle body for my 103 also. How did this setup work for you? Why did you remove it ? Do you feel that this was too big for your 103? Thanks for any help and I am interested in it,
Craig C.
 
  #4  
Old 09-30-2011, 12:37 PM
Nick-O's Avatar
Nick-O
Nick-O is offline
Tourer
Thread Starter
Join Date: Feb 2010
Location: MCAS SC
Posts: 370
Likes: 0
Received 2 Likes on 2 Posts
Default

I thought initially it was going to be too big. I had an autotune on it and used a map for a 54mm, i think it was map 419 or something like that. The owner of our local indy shop dialed it in a little more and it ran pretty well. I liked it all but the slow speed lugging, but that bike never was much for lower rpm power anyway.
I removed it before selling it last winter, with the intention of putting it on my 103 softail, but my wife took that bike over this spring and she does not want it too crazy. I have predetontion issues with that bike so I think it would have been a good candidate for the set up. Anyway, she has hung on to the bike and wants no mechanical changes so I done holding it. My other bikes are carb'd at the moment.
Hope that gives you some idea. I think it all depends on the engine internals and what you use the bike for, or how you use the bike. My local says they are usually for 110" and up, but he managed to get it working fine....
 

Last edited by Nick-O; 09-30-2011 at 12:41 PM. Reason: spelling
  #5  
Old 09-30-2011, 05:27 PM
Craig C.'s Avatar
Craig C.
Craig C. is offline
Advanced
Join Date: Apr 2008
Location: Dewitt, MI
Posts: 90
Likes: 0
Received 0 Likes on 0 Posts
Default

Hey Nick-O, Thanks for the info. I think I may pass on it and look for something a little smaller. I want my bike to have a litttle bottom end. I might go with a 50 mm. Good luck with it and thanks for the info...
 
  #6  
Old 10-12-2011, 07:24 AM
Nick-O's Avatar
Nick-O
Nick-O is offline
Tourer
Thread Starter
Join Date: Feb 2010
Location: MCAS SC
Posts: 370
Likes: 0
Received 2 Likes on 2 Posts
Default

Set up is still available. Many questions but no sale as of yet. This is a great deal...as new.
 
  #7  
Old 12-01-2011, 07:22 AM
Nick-O's Avatar
Nick-O
Nick-O is offline
Tourer
Thread Starter
Join Date: Feb 2010
Location: MCAS SC
Posts: 370
Likes: 0
Received 2 Likes on 2 Posts
Default

SOLD * thanks.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Nick-O
Softail Parts
8
10-12-2011 07:22 AM
Nick-O
Dyna Parts
2
10-12-2011 07:20 AM
Nick-O
Motorcycle Parts For Sale-Misc. Parts
0
09-26-2011 03:26 PM
fj4069
Exhaust System Topics
2
02-29-2008 07:54 PM
piekarj
Exhaust System Topics
7
01-05-2008 01:06 PM



Quick Reply: 58mm SE Polished Throttle Body Assy Complete



All times are GMT -5. The time now is 11:34 AM.