Vendor For Sale Classifieds HDForums Sponsors/Advertisers will post special group buys for our members here!! Check it out.

***Dirty Air "El Grande" Fast Up Front & Rear Kit***

Thread Tools
 
Search this Thread
 
  #1  
Old 03-31-2017, 09:46 AM
EasternPC_Forum's Avatar
EasternPC_Forum
EasternPC_Forum is offline
Former Sponsor
Thread Starter
Join Date: Nov 2012
Location: Gambrills, Maryland
Posts: 1,094
Received 3 Likes on 3 Posts
Default ***Dirty Air "El Grande" Fast Up Front & Rear Kit***

"El Grande" Fast Up
Starting at $1299.99




Please call for further details
(410) 451 5181 ext. 213



Everything you need for front and rear fast air.

Custom built stainless steel tank built to your specs, default design built with brackets to mount underneath the left saddle bag, hidden by stretched bags.

Includes AccuAir valve unit, default mounting would be on the side of the tank, under the left bag.

Includes DIRTY AIR rear shocks, with polyurethane bushings and push lock fittings installed for 1/4" or 5/32" tubing.

Option to upgrade to aluminum shocks, designed and built from the ground up to be the most reliable, most comfortable ride and best performing air shock available. System runs all 1/4" or 5/32" tubing. 1/4" is as fast as possible, 5/32" is a little smoother, the tubing is a little easier to work with.

Complete kits usually ship within a day or two.

Please note that if you're running stock triple trees, or trees that re-use the factory fork cap bolt, you will need to add new fork caps to allow you to plumb air to your forks unless you want to drill and tap the factory fork caps - If you have aftermarket trees, you should have a drilled/tapped hole for an air fitting in your leg extensions, let us know what trees and wheel size you have or what size the threaded hole is (varies by manufacturer) so we can get you exactly what you need.

Stock sized front wheels do not require bump stops, oversized front wheels usually require front fork bump stops depending on the neck/tree setup, wheel size, fender spacing, fairing, etc.

We recommend calling us first to discuss details and options if you're not sure about the details, as components and mounting options can vary from bike to bike, year to year, and with factory and aftermarket options.

Dirty Air trys to custom tailor each of these systems to your bike to get you the best performing parts that will fit on your bike, and everything you need in one shot.


LIMITED LIFETIME WARRANTY ON SHOCKS, TANKS AND BRACKETS, 1 YEAR WARRANTY ON ALL OTHER PARTS. FREE SHIPPING TO US 48.
 

Last edited by EasternPC_Forum; 03-31-2017 at 12:59 PM.
  #2  
Old 04-29-2017, 10:49 AM
jman1115's Avatar
jman1115
jman1115 is offline
Cruiser
Join Date: Mar 2009
Location: In a hay field somewhere in Texas
Posts: 133
Received 0 Likes on 0 Posts
Default Fast up system

[hi, I am having a problem with my system not stopping inflation. Bike goes up to max pressure within a min of lowering it to desired pressure. One connection on the block was leaking and you sent one and it was replaced. Is the system going to pop a bag from over inflation? We're out for the weekend and need some support.



Please call for further details
(410) 451 5181 ext. 213



Everything you need for front and rear fast air.

Custom built stainless steel tank built to your specs, default design built with brackets to mount underneath the left saddle bag, hidden by stretched bags.

Includes AccuAir valve unit, default mounting would be on the side of the tank, under the left bag.

Includes DIRTY AIR rear shocks, with polyurethane bushings and push lock fittings installed for 1/4" or 5/32" tubing.

Option to upgrade to aluminum shocks, designed and built from the ground up to be the most reliable, most comfortable ride and best performing air shock available. System runs all 1/4" or 5/32" tubing. 1/4" is as fast as possible, 5/32" is a little smoother, the tubing is a little easier to work with.

Complete kits usually ship within a day or two.

Please note that if you're running stock triple trees, or trees that re-use the factory fork cap bolt, you will need to add new fork caps to allow you to plumb air to your forks unless you want to drill and tap the factory fork caps - If you have aftermarket trees, you should have a drilled/tapped hole for an air fitting in your leg extensions, let us know what trees and wheel size you have or what size the threaded hole is (varies by manufacturer) so we can get you exactly what you need.

Stock sized front wheels do not require bump stops, oversized front wheels usually require front fork bump stops depending on the neck/tree setup, wheel size, fender spacing, fairing, etc.

We recommend calling us first to discuss details and options if you're not sure about the details, as components and mounting options can vary from bike to bike, year to year, and with factory and aftermarket options.

Dirty Air trys to custom tailor each of these systems to your bike to get you the best performing parts that will fit on your bike, and everything you need in one shot.


LIMITED LIFETIME WARRANTY ON SHOCKS, TANKS AND BRACKETS, 1 YEAR WARRANTY ON ALL OTHER PARTS. FREE SHIPPING TO US 48.
[/QUOTE]
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sci
EVO
4
07-27-2016 08:12 PM
hyrax222
EVO
14
03-21-2015 09:24 PM
foxtrapper
Touring Models
9
09-13-2013 07:55 AM
jeremy2854
Touring Models
14
08-01-2013 06:29 AM
Johnnyiroc
General Harley Davidson Chat
0
08-11-2009 11:32 AM



Quick Reply: ***Dirty Air "El Grande" Fast Up Front & Rear Kit***



All times are GMT -5. The time now is 11:17 AM.