Dynatek Dynatune Fuel Tuners Now At Phat!
#1
Dynatek Dynatune Fuel Tuners Now At Phat!
Here's a new product we're now carrying:
Dynatek Dynatune Kits
Dynatek Dyna 2000-HDEFI Fuel & Ignition Controllers
Dynatek announces the new Dyna 2000-HDEFI ignition system, an ignition and fuel injection control module that plugs inline with the bike's stock ECM. The Dyna 2000 uses O.E.M. style connectors, so no splicing or cutting of the harness is required.
Ignition Timing Control
Dynatek Dynatune Kits
- The DynaTune kit monitors the fuel mixture (by installing the included Wide Band O2 sensor(s) in the exhaust)
- It then sends this information to the Dynatek Control Module (either the Dynatek 3000 or Dyna FS Fuel and Ignition modules) and automatically corrects it as you ride, letting you feel the changes as they happen. Each map that Dynatek offers has preset Air/Fuel ratio target values included that have been found to be the best overall settings. This lets you simply plug in the unit and let it do the work
- For advanced users who would like to change the Air/Fuel ratios from our baseline, they are fully adjustable. Each throttle
opening/rpm combination is individually adjustable, so that you can have both fuel economy, during cruise, while maintaining peak output at larger throttle openings. For most models of bikes, it is also possible to adjust the Air/Fuel ratios
'per gear'. This gives you total control of the fueling in every gear and throttle/rpm area if required - The DynaTune kit can be configured to run and make adjustments at all times or by using the 'map switch port' on
the Dynatek Control Module you can set it up so that you can switch back and forth between the tuning mode and the base
map settings. You can also configure the DynaTune kit to wait until the bike is at a certain operating temperature before
beginning to make adjustments
Dynatek Dyna 2000-HDEFI Fuel & Ignition Controllers
Dynatek announces the new Dyna 2000-HDEFI ignition system, an ignition and fuel injection control module that plugs inline with the bike's stock ECM. The Dyna 2000 uses O.E.M. style connectors, so no splicing or cutting of the harness is required.
Ignition Timing Control
- Significant horsepower can often be made by making timing adjustments as well as being able to correct detonation problems that may occur. You can advance or retard your stock timing curve by +/- 10° using the included Control Center software
- The Dyna 2000-HDEFI allows for very specific fuel adjustment of the entire range of throttle openings and RPM combinations. Adjustments can also be based on additional inputs such as cylinder head temp or gear position
- The rev limiter is raised to 6200 RPM
- Compatible with the DynaTune Auto Tuning Kit The Dyna 2000-HDEFI can be used with the optional DynaTune autotune kits for on the fly automatic fuel
Thread
Thread Starter
Forum
Replies
Last Post
HDF Tech
Ignition/Tuner/ECM/Fuel Injection
0
06-29-2005 11:17 AM
HDF Tech
Ignition/Tuner/ECM/Fuel Injection
0
06-25-2005 11:15 AM