DK Tank Lifts, What You Didn't Know, Need To Know, Want To Know, Updated Weekly!!!!!!
#231
01-31-2019, 02:06 PM
Platinum Sponsor
Sebastion's Kickass Bike with a DK Custom Tank Lift!
Go HERE to Find One for Your Bike!
Go HERE to Find One for Your Bike!
__________________
Cristy
FREE SHIPPING - ORDERS OF $100 OR MORE - LOWER 48 STATES
www.DKCustom.com
Call: 662-252-8828
Text: 662-420-4891
Email: Support@DKCustomProducts.com
Cristy
FREE SHIPPING - ORDERS OF $100 OR MORE - LOWER 48 STATES
www.DKCustom.com
Call: 662-252-8828
Text: 662-420-4891
Email: Support@DKCustomProducts.com
#233
02-20-2019, 09:25 PM
Tank Lift on Breakout
I’m interested in the DK Tank lift. I had it on my Sportster and it looked great. I have a 2016 Breakout and I wanted to know if I can put a tank lift on it with the stock risers? There’s the speedo built into the top riser clamp and I wanted to make sure it wouldn’t hit.
#234
02-21-2019, 02:55 AM
Seasoned HDF Member
Join Date: Sep 2013
Location: Great State of Canada
Posts: 6,166
Received 1,934 Likes
on
1,111 Posts
I’m interested in the DK Tank lift. I had it on my Sportster and it looked great. I have a 2016 Breakout and I wanted to know if I can put a tank lift on it with the stock risers? There’s the speedo built into the top riser clamp and I wanted to make sure it wouldn’t hit.
See post 220 above for pics.
Last edited by HKMark23; 02-21-2019 at 02:57 AM.
#235
02-21-2019, 07:58 AM
Tank lift BO
I lifted the tank on my '14 BO after replacing stock risers with short straight ones and replacing stock bushings with 10 degree angled ones, (installed so the risers tilt forward). I vaguely recall some discussion where a BO owner simply reversed the stock risers to permit the lift too.
See post 220 above for pics.
See post 220 above for pics.
#236
02-21-2019, 10:18 AM
Seasoned HDF Member
Join Date: Sep 2013
Location: Great State of Canada
Posts: 6,166
Received 1,934 Likes
on
1,111 Posts
https://www.denniskirk.com/la-choppe...prd/598833.sku
.
#238
03-29-2019, 05:52 AM
Short Risers
I lifted the tank on my '14 BO after replacing stock risers with short straight ones and replacing stock bushings with 10 degree angled ones, (installed so the risers tilt forward). I vaguely recall some discussion where a BO owner simply reversed the stock risers to permit the lift too.
See post 220 above for pics.
See post 220 above for pics.
#239
04-22-2019, 01:49 AM
Elite HDF Member
'09 Ultra w/ PYO MBB's pushed all the way forward
'09 Ultra w/ PYO MBB bars pushed all the way forward.
Looks like 2" is what I want. Haven't measured yet, but with bars pushed forward max, I'm sure it is right.
My question is mostly regarding the Deluxe add-on: it says lift AND push tank back. Could you make it do one without the other if you wanted? I know I want front lift, I think I want to push it back a bit (which will help with clearence since I want 2") but I'm not sure I want to raise the back.
So is the rear Deluxe part all or nothing with regards to lift and pulling tank back? Or might I be able to do one without the other if that is what seems best when installing?
BTW...doing this mostly for reducing buffering, 2nd concern being cooling, and 3rd being looks. I am **** though, so I will be working hard to make the confluence of the seat, tank, side cover, frame, and wind deflector to look it's best.
P. 'S. What year is the red Touring bike in your before/after pics? Also what height and dies it include Deluxe?
Oh, and is there a HDF discount?
Thanks...
Looks like 2" is what I want. Haven't measured yet, but with bars pushed forward max, I'm sure it is right.
My question is mostly regarding the Deluxe add-on: it says lift AND push tank back. Could you make it do one without the other if you wanted? I know I want front lift, I think I want to push it back a bit (which will help with clearence since I want 2") but I'm not sure I want to raise the back.
So is the rear Deluxe part all or nothing with regards to lift and pulling tank back? Or might I be able to do one without the other if that is what seems best when installing?
BTW...doing this mostly for reducing buffering, 2nd concern being cooling, and 3rd being looks. I am **** though, so I will be working hard to make the confluence of the seat, tank, side cover, frame, and wind deflector to look it's best.
P. 'S. What year is the red Touring bike in your before/after pics? Also what height and dies it include Deluxe?
Oh, and is there a HDF discount?
Thanks...
Last edited by Dew Me; 04-22-2019 at 01:53 AM.
#240
04-27-2019, 07:43 AM
Seasoned HDF Member
Join Date: Sep 2013
Location: Great State of Canada
Posts: 6,166
Received 1,934 Likes
on
1,111 Posts
These may do the trick ???
https://www.denniskirk.com/drag-spec...35.sku#q-and-a
Last edited by HKMark23; 04-27-2019 at 07:55 AM.