Hi
I have got a dyna fxd 2003 and looking at changing the wheels from spokes to cast? am I right in thinking that the axle and spacers are all the same sizes? many thanks. Judy

 

I think you will get more replies/faster replies in the dyna section. you can probably swap some other dyna wheels on reusing your stuff...you can use this chart to look up diff dyna models an part numbers:

http://partsfinder.onlinemicrofiche....-LOW-RIDER-(GD)

 

Just make sure everything is spaced correctly when doing the swap. I just did my 01 fxdl a few months back, and they rear was really off and the front is 1/8th of an inch off still.
I went with a couple of thunderstar front wheel and a solid rear wheel and to me the bike looks much better than before.

 

Before


After

 

Just re-use your existing spacers if you install a cast wheel set that are from a 2000-2005 Dyna or 2000-2007 sportster. Change the bearings to your 3/4" size if the replacements have 1"



More and faster replies aren't nearly as important as accurate ones


.