Harley Davidson Forums
0 2020/01/02 13:47:36
Getting ready to head out. Mine is down by the suburban.
Getting ready to head out. Mine is down by the suburban.
0 2019/11/09 16:36:57
Just arrived. My wife took the pic.
Just arrived. My wife took the pic.
0 2019/11/09 16:36:38
0 2019/11/07 18:01:49
0 2019/11/05 23:08:21
0 2019/11/05 23:07:16
On tour
On tour
0 2019/11/01 16:57:40
Same bike diff angle and stock pipes.
Same bike diff angle and stock pipes.
0 2019/11/01 16:57:01
0 2019/10/28 11:48:16
0 2019/10/26 17:52:10
This is from the left side, and you have to look close to see the filter. The outlet of the filter runs down behind the crankcase beside brake line, and is zip tied to the brake line.
This is from the left side, and you have to look close to see the filter. The outlet of the filter runs down behind the crankcase beside brake line, and is zip tied to the brake line.
0 2019/10/26 17:52:06
Look real close to the left of the rear cylinder to see the copper and hose.
Look real close to the left of the rear cylinder to see the copper and hose.
0 2019/10/26 17:52:02
0 2019/10/26 17:49:57
0 2019/10/26 17:49:52
0 2019/10/26 17:47:43
0 2019/10/26 17:47:37
0 2019/10/25 19:35:17
0 2019/10/25 19:32:20
0 2019/10/25 19:31:06
0 2019/10/25 19:24:56
0 2019/10/25 19:19:06
0 2019/10/25 19:17:11
0 2019/10/22 13:40:50
0 2019/10/19 19:23:35
0 2019/10/19 19:23:30
0 2019/10/19 19:23:19
0 2019/10/05 18:29:22
0 2019/10/05 18:26:32
0 2019/10/05 18:26:26
This is what the housing looks like with the core removed. Seriously I believe these with the core out and Thunder Torque inserts would sound just as good as the Cobras. I might just try that before its all over.
This is what the housing looks like with the core removed. Seriously I believe these with the core out and Thunder Torque inserts would sound just as good as the Cobras. I might just try that before its all over.
0 2019/10/05 18:20:12
This is the core. These holes are about 50% larger than stock, and I opened them further to how they look in the next pic.
This is the core. These holes are about 50% larger than stock, and I opened them further to how they look in the next pic.
0 2019/10/05 18:20:06
This is my final opening, I think I used a 9/32" drill.
This is my final opening, I think I used a 9/32" drill.
0 2019/10/05 18:20:00
0 2019/10/02 20:14:42
0 2019/10/02 20:14:36
0 2019/10/02 17:25:30
0 2019/10/02 17:25:24
After a slight touch up with the 4.5" angle grinder.
After a slight touch up with the 4.5" angle grinder.
0 2019/09/19 10:54:24
With the TTi installed. Note the bolt sticks up too high to reinstall the core in the shell.
With the TTi installed. Note the bolt sticks up too high to reinstall the core in the shell.
0 2019/09/19 10:00:37
Where I drilled the hole for the TTi.
Where I drilled the hole for the TTi.
0 2019/09/19 10:00:30
0 2019/09/19 09:59:17
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
© 2026 MH Sub I, LLC dba Internet Brands