Spark Plug Cleaning
#1
Spark Plug Cleaning
What's the proper fluid for cleaning spark plugs with? I'm mechanically challenged and the last time I cleaned a spark plug was in 1979 on a Suzuki PE 185. I used gasoline. Is this (or was this ever) an acceptable practice?
Thanks,
bfrmbama
Thanks,
bfrmbama
#2
Join Date: Dec 2004
Location: Texas! Ya mean there's someplace else?
Posts: 11,062
Received 1,211 Likes
on
461 Posts
RE: Spark Plug Cleaning
I always just wire brushed 'em. Might've used a bit of gas if the deposits were really cooked on. haven't had to clean a plug since electronic ignitions, though.
#5
RE: Spark Plug Cleaning
I was just wanting to check the wear after a couple of hundred miles, and since I had 'em out, I thought I should wipe 'em down. I was just wondering if there was something I should be using. They looked good though and really didn't need much of a wipe down.
I had the hd double platinum plugs on my bike when I bought it ('03 Fatboy) and replaced them with Screamin' Eagle Triple Plat Performance at 15,000 miles just for the heck of it. I bought the type made for stock motors. Anyway, I ended up fouling them out after about 200 miles. Therefore, I replaced them with the double plat's and just wanted to watch the wear.
When I fouled out the triple plats, I was in a torrential downpour the day before. I mean a heavy rain. A summerstorm that came out of nowhere. I'm still wondering if it was the storm that caused the plugs to foul out or if I was just using the wrong plugs?
Thanks for the quick replies.
bfrmbama
I had the hd double platinum plugs on my bike when I bought it ('03 Fatboy) and replaced them with Screamin' Eagle Triple Plat Performance at 15,000 miles just for the heck of it. I bought the type made for stock motors. Anyway, I ended up fouling them out after about 200 miles. Therefore, I replaced them with the double plat's and just wanted to watch the wear.
When I fouled out the triple plats, I was in a torrential downpour the day before. I mean a heavy rain. A summerstorm that came out of nowhere. I'm still wondering if it was the storm that caused the plugs to foul out or if I was just using the wrong plugs?
Thanks for the quick replies.
bfrmbama
#7
RE: Spark Plug Cleaning
Bfrmbama,
You should not be fouling plugs. Do you have an overly rich condition? Are the plugs oily (perhaps a more serious problem)? I have not ridden in rain but I can sort of understand possible fouling in a heavy rain. Sometimes when in my truck during severe rainfall I can feel the engine starving for air. This could possibly have caused a rich condition for your bike (just a theory).
You should not be fouling plugs. Do you have an overly rich condition? Are the plugs oily (perhaps a more serious problem)? I have not ridden in rain but I can sort of understand possible fouling in a heavy rain. Sometimes when in my truck during severe rainfall I can feel the engine starving for air. This could possibly have caused a rich condition for your bike (just a theory).
Trending Topics
#8
RE: Spark Plug Cleaning
Just a word of caution about changing to different plugs. If you vary from the stock plugs the ION sensing that detects knock in your ignition system will be affected and that could cause your motor to knock and possibly cause damage over time. It may also set a code.
There's a topic in the DIY section that explains this. https://www.hdforums.com/m_98758/tm.htm
There's a topic in the DIY section that explains this. https://www.hdforums.com/m_98758/tm.htm
#9
RE: Spark Plug Cleaning
No way you should be fouling plugs... look for the real problem. A leaky valve seal will foul plugs too... And, I'm with Mark. At $3 I'll just replace them.
#10
Join Date: Jul 2005
Location: Lockport Township, IL
Posts: 3,968
Likes: 0
Received 34 Likes
on
16 Posts
RE: Spark Plug Cleaning
I wouldn't use a wire brush to clean the spark plugs. Any metal getting into the porceline could cause plug failure. Personally, I'd just replace them, but if you really want to clean them, in the old days sand-blasters were sold specifically for plug cleaning. Just make sure you get all the sand blown out of the plug before re-insatlling.