Thunder Mountain owners PLEASE read and see pics.
#14
Hi
Just registered to this forum after reading your post and seeing the pictures of your spitfire frame! Do you have any pictures of the repair as i have just purchased a 2009 spitfire myself as a bit of a resteration project as it has been a bit neglected! i noticed that mine has already had some gussets welded in the place where the crackes are on your pictures. I intend to strip the frame and have it re powder coated. Are these the only weak points on this frame as far as you know?
Regards Tom
Just registered to this forum after reading your post and seeing the pictures of your spitfire frame! Do you have any pictures of the repair as i have just purchased a 2009 spitfire myself as a bit of a resteration project as it has been a bit neglected! i noticed that mine has already had some gussets welded in the place where the crackes are on your pictures. I intend to strip the frame and have it re powder coated. Are these the only weak points on this frame as far as you know?
Regards Tom
#15
Hi Tom. Sorry for the super late response to your question as I haven't checked this thread in a good while. As far as weak points, yes, those are the only ones that I'm aware of. Since the repair weld, it has held up well. Go luck with yours.
Last edited by cruzomatic; 01-23-2014 at 02:16 PM.
#17
Help!!
Can anyone out there help???
I have discovered the same problem with my wife's spitfire. Is there a way I can contact you (or anyone else who has had the same issue) to discuss your repairs and how it is holding up? Hope you can help me out...... my e mail is brown69640@yahoo.com Thanks, VB
I have discovered the same problem with my wife's spitfire. Is there a way I can contact you (or anyone else who has had the same issue) to discuss your repairs and how it is holding up? Hope you can help me out...... my e mail is brown69640@yahoo.com Thanks, VB
#18
I own a 04 Thunder Mountain "Gunnison" and it also developed cracks in the frame below the neck, on both down tubes!! I had a frame shop tig weld the 3 areas before I rode it again. I strongly suggest if you value your life behind ur handlebars like I do, look ur Thunder Mountain frames over real good!!
wildman58
wildman58
#19
I own a 04 Thunder Mountain "Gunnison" and it also developed cracks in the frame below the neck, on both down tubes!! I had a frame shop tig weld the 3 areas before I rode it again. I strongly suggest if you value your life behind ur handlebars like I do, look ur Thunder Mountain frames over real good!!
wildman58
wildman58
I have photos I'd be happy to share if anyone is interested in seeing them...
feel free to email me at "c__schafer@hotmail.com" and I'll get em to ya.
Ride Safe
wildman58
#20
Has anyone else had any other areas of cracking in frame other than in the rear where subframe bolts on? it seems this would be relatively easy to fix but cracks in the front frame is another way more serious matter and not an easy fix