Front master cylinder bore size, 1999 Dyna Sport
#1
02-04-2013, 09:27 AM
Front master cylinder bore size, 1999 Dyna Sport
Greetings all.
I purchased a set of front forks that I was told came off of a 1999 Dyna Sport. It's set up for dual disks. Does anyone know what the front master cylinder bore size is from this model? 11/16's? 3/4's? Some other size? I don't know.
Thank you
PS if someone could provide the HD part # for the master cylinder, I'd be grateful for that info too.
I purchased a set of front forks that I was told came off of a 1999 Dyna Sport. It's set up for dual disks. Does anyone know what the front master cylinder bore size is from this model? 11/16's? 3/4's? Some other size? I don't know.
Thank you
PS if someone could provide the HD part # for the master cylinder, I'd be grateful for that info too.
Last edited by Artlee; 02-04-2013 at 09:49 AM.
#4
02-04-2013, 12:16 PM
Join Date: Feb 2007
Location: Harmelen (The Netherlands, Europe)
Posts: 8,986
Received 867 Likes
on
576 Posts
+1:
45013-96D is 11/16 inch bore (dual disks)
45019-96D is 9/16 inch bore (single disk)
Check out these links from:
Ronnie's for the p/ns and
Retrocycle for the bore diameter of these p/ns.
45013-96D is 11/16 inch bore (dual disks)
45019-96D is 9/16 inch bore (single disk)
Check out these links from:
Ronnie's for the p/ns and
Retrocycle for the bore diameter of these p/ns.
#5
02-04-2013, 12:40 PM
+1:
45013-96D is 11/16 inch bore (dual disks)
45019-96D is 9/16 inch bore (single disk)
Check out these links from:
Ronnie's for the p/ns and
Retrocycle for the bore diameter of these p/ns.
45013-96D is 11/16 inch bore (dual disks)
45019-96D is 9/16 inch bore (single disk)
Check out these links from:
Ronnie's for the p/ns and
Retrocycle for the bore diameter of these p/ns.
-edit- that Ronnie's link is the extra info I was hoping to procure.
Thanks again Rene
Last edited by Artlee; 02-04-2013 at 12:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post