New S&S TC 3 oil pump and cam support plate
#1
New S&S TC 3 oil pump and cam support plate
Has anybody seen this new setup? Pretty trick stuff. Looks like $349 for the plate, and $399
for the pump. Maybe a little discount if you buy both. Cost seems comparable with the Fueling
HD+. And cheaper than their race line. The S&S
has oil pressure adjustments built into the cam plate. The million dollar question is, is it worth the cash? Say over the screamin eagle cam plate and pump that retail for about $430.
for the pump. Maybe a little discount if you buy both. Cost seems comparable with the Fueling
HD+. And cheaper than their race line. The S&S
has oil pressure adjustments built into the cam plate. The million dollar question is, is it worth the cash? Say over the screamin eagle cam plate and pump that retail for about $430.
Last edited by 1911flhx; 06-14-2015 at 08:53 PM.
#3
They stole that pump from Dan Thayer.
Scott
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
#4
#5
#6
My indy ordered one of these set ups a few weeks ago for one of his customer's bikes. He couldn't get any oil pressure after the install. The guts were missing from the adjustable oil pressure regulator. He called them and they said they would replace the cam plate with a new one with the correct parts.
Last edited by GibT; 06-17-2015 at 10:12 AM.
#7
Trending Topics
#8
#10