anyone tell me the actual horsepower and torque of the 96ci motor on a 2008 superglide with no mods??? this is my first computerised motor ive only owned old bikes this is my first new one

 

You would have to dyno it to get accurate #'s. From what I have seen most are in the mid 60's hp and low to mid 80's tq.

 

was just trying to figure out which way i wanted to go with it

 

If you are lookin' for extreme HP...You are lost...If you are happy with 80-hp stock, you are fine!

 

Sounds about right. Torque estimate might be a little on the high side.

 

Saw a stock '07 dyno'd @ 66 HP, 79 ft/lbs torque

 

Just to , this is a base line dyno run on a 2007 Fatboy. The bike is stock except for the SE air filter and Vance & Hines big shots (with power chamber that joins the two pipes together). The bike also has a stage 1 download. The dyno run was in 4th gear:

 

My stock 96 was 63hp, and 79Tq.

After stg1 and cams it was 80hp and 91Tq.

Heres the dyno of both..

 

thanks guys.. ya'll are so helpful, im so glad i joined hd forums

 

If you like the bike "Great" if your interested in Torque & Horsepower your either need to get a second job to pay for the mods or get a second bike. I love harleys but I have no delusion that its a performance bike. They are" cruisers" You would think the MOCO could do better on this issue. Passing cars even with the stage 2 is sometimes frustrating compared to My rocket that has 140 hp and 150 Ft lbs Torque from the factory. Now if I could only get my 3 cylinder rocket to make the potato - potato sound that would be a hell of a bike!