06' FLHTCUSE from 103CI to 107CI
#1
06' FLHTCUSE from 103CI to 107CI
It has been awhile, but after getting advice on several forums, my 06 FLHTCUSE (103CI) is now a 107CI motor.
Went with the following:
NRHS Stage 2 CNC ported TC 88 heads set to 87cc to achieve 10.2:1 compression (swapped out my 103 heads)
Andrews Hydraulic Cam Conversion Kit with Andrews 54N cams
Bored Cylinders to 3.938 and installed CP 107FT forged pistons
Changed out injectors to SE 4.89
Already had SE High Flow Air Cleaner and Rinehart True Duals with Performance Baffles
Dyno Tuned
I am picking up the bike either Saturday 1/16 or Sunday 1/17 if the weather provides here in Denver Colorado.
The Tuner provided me with the dyno numbers today am I am pleased 104HP and 112 TQ here at 5280 feet.
Again I just want to thank all of you who contributed your knowledge and expertise in helping me make educated choices.
Thank You,
Tom
Went with the following:
NRHS Stage 2 CNC ported TC 88 heads set to 87cc to achieve 10.2:1 compression (swapped out my 103 heads)
Andrews Hydraulic Cam Conversion Kit with Andrews 54N cams
Bored Cylinders to 3.938 and installed CP 107FT forged pistons
Changed out injectors to SE 4.89
Already had SE High Flow Air Cleaner and Rinehart True Duals with Performance Baffles
Dyno Tuned
I am picking up the bike either Saturday 1/16 or Sunday 1/17 if the weather provides here in Denver Colorado.
The Tuner provided me with the dyno numbers today am I am pleased 104HP and 112 TQ here at 5280 feet.
Again I just want to thank all of you who contributed your knowledge and expertise in helping me make educated choices.
Thank You,
Tom
Last edited by tom149; 03-30-2010 at 12:03 AM. Reason: new pic
Thread
Thread Starter
Forum
Replies
Last Post
VRYQUIK
Harley Davidson Videos
8
02-07-2009 08:40 PM