crane hi-4 single fire
#1
crane hi-4 single fire
can someone help me i have a 79 model86 cube with kick start only and want to change back to electronic ignition so im buying a hi-4 single fire. i have been told i need a new coil only problem it must be same shape as the original coil to fit in same spot as there is not a lot of room where it is for another one a different shape. can someone recommend one as it has to be 2ohms or bigger. any chance of a part no: is the hi4 single fire race the right on for the job
#2
#3
RE: crane hi-4 single fire
H1 and welcome to the HDForum HDdee,
are you wanting to switch to the single fire system?
after looking on the crane web site
it looks to me as if the h4 is a single fire system only which will take a single fire coil.
If you want to use your same coil the Hi-1 may be a better choice.
Accel also provides a dual / single fire ignition you could take a look at. I installed this same type ignition on my 68 and so far it has worked out great and the tech support has been good. Not that I needed it I called to ask questions before I bought and was able to get right to a tech guy.
I'm sure more help is on the why for you.
it's always a real good idea to order what you need the first time when it comes to electronic items as returns can be a pain in the rear!
are you wanting to switch to the single fire system?
after looking on the crane web site
it looks to me as if the h4 is a single fire system only which will take a single fire coil.
If you want to use your same coil the Hi-1 may be a better choice.
Accel also provides a dual / single fire ignition you could take a look at. I installed this same type ignition on my 68 and so far it has worked out great and the tech support has been good. Not that I needed it I called to ask questions before I bought and was able to get right to a tech guy.
I'm sure more help is on the why for you.
it's always a real good idea to order what you need the first time when it comes to electronic items as returns can be a pain in the rear!
#4
RE: crane hi-4 single fire
ORIGINAL: hddee
can someone help me i have a 79 model86 cube with kick start only and want to change back to electronic ignition so im buying a hi-4 single fire. i have been told i need a new coil only problem it must be same shape as the original coil to fit in same spot as there is not a lot of room where it is for another one a different shape. can someone recommend one as it has to be 2ohms or bigger. any chance of a part no: is the hi4 single fire race the right on for the job
can someone help me i have a 79 model86 cube with kick start only and want to change back to electronic ignition so im buying a hi-4 single fire. i have been told i need a new coil only problem it must be same shape as the original coil to fit in same spot as there is not a lot of room where it is for another one a different shape. can someone recommend one as it has to be 2ohms or bigger. any chance of a part no: is the hi4 single fire race the right on for the job
#6
RE: crane hi-4 single fire
I'm a big fan of the HI-4. I use them on my street bikes, and my dragster. The cool thing about it is that it has a dip switch for electric or kick start. Make sure you check it. It also has a switch for Race. Make sure to switch it to race. It will go into full advance right out of the hole and give you better acceleration. Follow the instructions carefully for the set-up, and don't blow off timing your rear cylinder.
#7
Trending Topics
#9
#10
RE: crane hi-4 single fire
I forgot how to wire my(crane) HI-1 on my shovel,I'm using 2 coils because I run dual plugs does ANYONE have a wire diagram for one?
When I first hooked up the wiring(new wire harness in the making and a bike I'm currently building) I had to splice the red,white and black wires from the HI-1 unit...I didnt have the right guage wire,it was slightly heavier guage.Then I forgot which wires went where on the coils I had a schematic for the whole set up but cant find the damn thing for love or money[] The combination of going with heavier wire and not getting the wires on the right posts really made for a fun time LOL.
Can someone help me out here?..........ED.
When I first hooked up the wiring(new wire harness in the making and a bike I'm currently building) I had to splice the red,white and black wires from the HI-1 unit...I didnt have the right guage wire,it was slightly heavier guage.Then I forgot which wires went where on the coils I had a schematic for the whole set up but cant find the damn thing for love or money[] The combination of going with heavier wire and not getting the wires on the right posts really made for a fun time LOL.
Can someone help me out here?..........ED.