1997 softail chopper
#1
1997 softail chopper
It started life as a 1997 softail custom after adding a ton of stuff it still got lost in the crowd.I was going to sell it to buy a chopper,long story short i wasn't going to pay 50k for it.The frame is the original frame done by Gardner Engineering, up 8in in the down tubes 4in backbone 38 degree rake.Harley polished motor and trans bottom 3 fins removed.Andrews cam,Wisco piston,H&L headwork,S&S carb Super E done by Zipper Performance and manifold,Wimmer Machine velocity stack and breathers,Arlen Ness oil filter adaptor,choppers inc motor mount,braided oil line and cables,Crane hi 4 ignition and coil,Spyke starter,D&D hardchrome pipe,harley trans back cut gears,BDL 3in belt drive.West Coast Chopper rear and front fender,MGS gas tank with flush mount filler cap.Perse Performance frontend 12in over,Arlen Ness headlight,Choppers Inc bars and risers,Performance Machine(pm) wheels,rotors,sprocket,4 piston calipers,front and rear,(pm)foward controls,side mount led plate,Adjure led rear signals,Thunderheart controller,all internal wiring,100hp to rear tire(180 tire),rides better than stock bike.Avon tires front and rear.All welds on frame and swing arm smoothed.Lepra seatHarley controls and switches. The color is Prowler Orange metallic,base coat clear.The color is awesome the shades change from different angles.
[IMG]local://upfiles/53288/0F4A66FEA19E4601A0646259463A670D.jpg[/IMG]
[IMG]local://upfiles/53288/0F4A66FEA19E4601A0646259463A670D.jpg[/IMG]
#7
Trending Topics
#9
#10