I just did mine and have the tube of adhesive left over from the install. there's enough to do at least 2 more installs. you might need another mixing tip for it but that should be easy enough through the manufacturer. it comes with the cork gun adapter too. just say the word and I'll mail it out to you for free(I couldn't take any money, I get so much help and ideas here)just paying it forward and trying to save someone some money. this site has probably saved me thousands over the last 3 years.............. anyone who wants it its theirs, if there's any left over mail it to someone else to use(if possible)

btw, its the exact adhesive Harley rips you off on(Maxlok MX/T6)its a 25ml tube.... I used around a third of it............ Harley gets around $50.00 for it, I got it from a chemical company for like $30.00

it has the mixing tip installed, I put a screw in the end of it to hopefully seal it but it mixes in the tip so it might harden. call Maxlok and inquire about another tip(easy enough)

 

Here's a pic of the tube...

 

Nobody needs this?

 

Bump..........

 

I'm surprised someone hasn't snapped that up from you, but I suspect the majority of people here who say "I'm installing the SE compensator!", actually rode to the dealer and paid to have it installed. And for some reason some who do install won't put the deflector on thinking it won't stay. I found that glue dries to a harder state than the plastic. Without the deflector the comp won't get lubricated.

 

No, hell no, nobody is replacing their compensator.

 

PM sent.

 

I'm replacing mine.....with a baker.

 

Agree, waiting on the Baker to arrive...

 

I hear you guys. this is my first go round with the screaming eagle. if this fails me(60/40 it probably will)I'll try the Baker, it'll have some feedback by then too........ good luck guys