I am searching for input on anyone that has done this, is there a certain brand that will work better?

 

Center stand with a "Bagger Brace" is not going to work. They both mount in the same place.

 

http://www.progressivesuspension.com...4/touring-link

Progressive suspension touring link and WheelDock EZUP center stand work well together

 

Depends what you want the centre-stand for. I have a front display stand on my bike, which mounts in front of the engine. Holds the bike upright while still on it's wheels and does fine for all I want. One of those won't interfere with a Bagger Brace. You can see it in my sigpic, tucked up under the floor boards.

 

+1 - Yes, they work well together with no interference.

 

I have an easy up center stand on mine that works great

 

With a Bagger Brace? I looked into adding a center stand quite a few years back and no can do because of my Bagger Brace.

 

I would think I could still use the top of the brace but didn't know if the the rear of it (the bracket around the rear of the pan would interfere with the stand in the up position?) I have sent a few emails to different companies that make the center stands. But I would think I could make one of them work with some minor mods anyone here do this?

 

I had the Wheel-Dock EZ-UP center stand mounted on my '07 along with the Progressive Stabilizing Brace. It all worked together well. It didn't even interfere with my ABS lines. That's what I was originally concerned about.
I removed and sold the center stand after installing Progressive shocks which lowered the bike. That did not leave enough ground clearance for me and even if it did the stand was now too long for the bike making it very difficult to use.