I've got an XM Satellite Radio Kit 76404-06 on order. I was reading through all of the audio section of the Touring Model Owner's Manual. There's information about the optional navigations but nothing about the optional XM radio.
For those that have had satellite radio activated you know you have to have a serial number or id number for your particular unit in order for the service to be activated. That's the information I was looking for.

 

Once you get everything hooked up go to XM setting on radio and scroll the channels to channel 0 and your ID number will appear in the radio display. Good luck.

 

That's one of the questions I have. Is there a visible XM radio display and setting only after the XM module is installed? When I ordered the XM module I asked what all I needed to do the installation. I was told that all I needed other than the XM module itself is the mounting bracket for the antenna. Now someone else is telling me I need something called an "OVERLAY HARNESS". Please explain if you know. I hate getting into an installation after taking the Batwing apart to find out I need something else.

 

Contact Ironcross they can tell you what you need to know i think

 

Did you read the installation instructions? You can get them online you know.

http://www.harley-davidson.com/gma/g...bmLocale=en_US

Anyway here ya go!
Kit Number
76404-06
Models
This kit fits 2006 and later FLHT (Electra Glide®), FLHTC
(Electra Glide Classic), FLHTCU (Ultra Classic® Electra Glide),
FLHX (Street GlideTM) and FLTR (Road Glide®) model motorcycles.
XM satellite radio is available within the continental United
States. It is not available in Alaska or Hawaii.
Additional Parts Required

FLHTCU models will require the additional purchase of an
Ultra Overlay Harness (Part Number 70164-06) and a left-hand
Antenna Bracket (Part Number 76456-06).

If two modules are already installed on top of the radio, two
Dual-LockTM mounts, Part Number 76434-06, will be needed.
These items are available from a Harley-Davidson Dealer.

 

That's just it. Yes I did read it after the fact. While talking to the part guy at Lake Shore Harley I ask what all I needed to do the XM installation. He told me, other than the antenna bracket, eveything I need was in the kit. Now I think I'm finding out the Ultra Overlay Harness (Part Number 70164-06) is over $100 by itself.

I guess I'm still learning about Harley accessories. The work KIT usually means that everything is included.

 

The Ultra overlay harness 70164-06 should be around $71.96
Suggested retail is $89.95

 

The Boom! Audio™ System Wiring Harness 70164-06 is for those with the Ultra models. Fits '06-later FLHTCU, FLHTK and FLHTCUTG models equipped with Advanced Audio Radio.
Fits '06-later FLHTCU, FLHTK and FLHTCUTG models equipped with Advanced Audio Radio
MSRP US $89.95


If you have a Non-Ultra models, you need the 70169-06, Boom! Audio™ System Wiring Harness. Fits '06-later FLHT, FLHX, FLHTC and FLTR models equipped with Advanced Audio Radio.
Fits '06-later FLHT, FLHX, FLHTC and FLTR models equipped with Advanced Audio Radio
MSRP US $129.95

You can also save money with 72172-06. Allows installation of XM® Satellite components on Ultra models. Does not provide connections for additional components.

MSRP US $49.95

 

I just plain failed to ask the right questions to the right people. I'll call tomorrow and order the harness.

As many XM satellite kit that Lake Shore probably sells you would think they would be able to tell their customers what they need.

 

Not all parts guy's are the same.