I've got a 11 SG with 103 & added SE 255's. I'm not sure when the hard starting began but it's really noticeable now, a little better when cold.
Battery seems fine, my question is with the auto compression releases..can those be shut off? I have been auto tuning with the PV and wondering if the map I started with or during my auto tuning I have inadvertently turned that function off. Maybe related to the 255's? Need some help before my starter croaks.

 

i ran the SE255 cams in my 2011 RKC with a 103 in it, put 10,500 miles on the bike with those cams and the ACRs worked and never a hot start issue. Sounds like maybe the ACR function got turned off to me.

 

I just started fooling w/my PV this afternoon. From what I observed if you have changed the tune(s), i.e. flashed the ECM, you need to check to see if the ACR was "ON" for that tune. You can check it with the Quicktune function. If they are not on you will have to select them on then save and then the PV will update that tune.

 

Thanks for the replies, I will check the acr setting (if I can find it) today and post what I find