If I go to a TG, one of the first things I have to change is the bars. Anyone changed the bars on a '14?

I installed Khrome Werks 300515s on my Ultra and have loved them for 4 years. Need something similar since I can't seem to make my arms any longer!

Looked at the Harley 56176-08 Reach as they are similar bars but can't find anything telling me what brake and clutch lines are needed or if the stock wires are long enough to facilitate internal wiring.

Any information? Anyone making a wiring extension kit yet? I know the canbus is a little different, but it is also less wires!

TIA

Ricky

 

I also would like to change bars, looking at La Choppers Twin Peaks 10" bars...
Hoping no extensions or cables needed....don't know for sure...

 

Double post

 

I put the HD's reduced reach, which are similiar to the 2" pull backs I had on the 2010, on the 2014 TG. The only thing it needed was a wire extension kit that HD has for around $30.
I think both or either set of bars helped my comfort & ease of steering.

 

I installed the HD reduced reach bars on my '14 tri-glide without needing to extend any of the wires or hoses.

 

Thanks guys! I did find these from Eastern. Looks like they make a 12" PNP for $36.

 

http://www.guerrillacables.com/Ultim...%20Bagger.html

This is their web site...

 

Not on a 14 but will on a 15...plan to go with wild one 575...better reach and rise and they keep your hands still behind the fairing...had them on an ultra and loved them...so glad this will be my last Harley build...

 

i did change to a 12" bar when i received my 14 in apr. i member that, at that time, it was a hd part with cables. and it was the tallest available. the issue appears to be with the special brake lines and the way the rushmore braking system works,. @ that time 12" was the max.