sony head units....
03-12-2014, 07:55 PM
Join Date: Mar 2012
Location: Michigan
Posts: 2,843
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
keno
I'm replacing my sony mex-BT4100P with a 310BTX...When I installed the mex, I cut off the RCA's from the PBR 300X2. Is that the preferred way to do it with the 310BXT?
You didn't cut them off the radio, right?
The pbr300x2 should always use the high level inputs. It sounds better that way.
03-12-2014, 08:05 PM
Join Date: Dec 2007
Location: Sierra Vista, Arizona
Posts: 1,056
I should get new Sony and remove fairing Monday to "refresh" myself on how UN had me wire it. My oldtimers is kicking in. can't remember s*%$
03-13-2014, 05:56 AM
Join Date: Oct 2012
Location: Indianapolis IN.
Posts: 6,621
Quote:
Originally Posted by
bagger_vance
say what????
lol. . . .
03-13-2014, 08:34 AM
Outstanding HDF Member
Thread Starter
Join Date: Mar 2012
Location: Land of the cold....
Posts: 2,296
thanks for all the info!!!yes you cut rca off the RF amps....high pass is the best...
03-13-2014, 05:17 PM
Join Date: Nov 2007
Location: East of the Sun, West of the Moon
Posts: 14,673
Quote:
Originally Posted by
Disneydave
Got the 310btx. Leave a spare solid state iPod in the tray and connect the iPhone via Bluetooth.
I'm not an i.X device fan but it sure was convenient having that small iPod. So I did just as DisneyDave did.
Being in IT, I need a real phone to work with so Android it was.
03-13-2014, 05:20 PM
Join Date: Nov 2007
Location: East of the Sun, West of the Moon
Posts: 14,673
Quote:
Originally Posted by
keno
I should get new Sony and remove fairing Monday to "refresh" myself on how UN had me wire it. My oldtimers is kicking in. can't remember s*%$
Well whichever way you did it, if you followed my advice it's right! LOL
Pioneer74 is right. These PBR amps sound MUCH better using speaker wire inputs to them.
03-13-2014, 05:41 PM
Join Date: Dec 2007
Location: Sierra Vista, Arizona
Posts: 1,056
YES UN. You were right on!...Do you know where I can get some of that sheeting that covers the top of the stereo for water protection?
03-13-2014, 06:07 PM
Join Date: Jun 2012
Location: USA
Posts: 2,087
Quote:
Originally Posted by
UltraNutZ
Well whichever way you did it, if you followed my advice it's right! LOL
Pioneer74 is right. These PBR amps sound MUCH better using speaker wire inputs to them.
I'm baffled why you would cut them off rather than just leave them alone or tape them out of the way. School me.
03-13-2014, 07:25 PM
Join Date: Nov 2007
Location: East of the Sun, West of the Moon
Posts: 14,673
Quote:
Originally Posted by
Bagger_Vance
I'm baffled why you would cut them off rather than just leave them alone or tape them out of the way. School me.
cause you cut them off to use the same wires as speaker level inputs.
03-13-2014, 07:26 PM
Join Date: Nov 2007
Location: East of the Sun, West of the Moon
Posts: 14,673
Quote:
Originally Posted by
keno
YES UN. You were right on!...Do you know where I can get some of that sheeting that covers the top of the stereo for water protection?
Walmart.. clear self-adhesive shelf lining