SS Super E Carb
#1
SS Super E Carb
I have a 1340 on 88 Softail FXSTC with a new super E carb i got the pilot jet 231 main at 70. I'm trying adjust the snap of throttle it fall on it face or back fires. It idles fine I turn the pilot in it stumbles then turn it back out it stumbles so i have it adjusted in the middle . Then I try adjusting accelerator screw for snapping of throttle it won't do it , just backfires , any help woukd be appreciated. Is my jetting ok or am off on my jets?
Last edited by eek88dj; 03-10-2018 at 02:59 PM.
#2
#3
#6
On a stock 1340, .028 intermediate .070 main with the Idle mixture screw at 1 1/2 turns out from lightly seated and the accelerator pump at 2 turns out from bottom. Make sure your idle is around 950 with the proper idle mixture screw setting... That should be very close to what that motor needs..... Timing could also affect idle and acceleration...
#7
Trending Topics
#9
What exhaust?
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
#10
I was having problems with my 883 sportster and a S&S Super E. It turned out that I had an air leak between the intake and the heads. I replaced a set of black seals with the blue ones pictured. It made all the difference.
Before changing the seals the bike would carb fart and "hunt" when traveling at a steady speed.
Craig
Before changing the seals the bike would carb fart and "hunt" when traveling at a steady speed.
Craig
Last edited by craigthecarpenter; 04-06-2018 at 10:54 PM. Reason: added some more info.