Fairings info-Share yours
#91
#94
Trying to decide what to do about it. Would like to switch to 7" light but don't want to spent a fortune. May need to fabricate a different block.
#95
#96
Here's mine. Fat Bob fairing handmade by Phil Birch in the Netherlands. Very good price, and extremely high quality workmanship. It's made of fibreglass, not plastic and is about 1/8" thick and really solid with absolutely no flexing. Comes finished in matte or gloss black and bolts to the handlebar riser and headlight bracket - so no fork fixings. Takes about 5 mins max to put on or take off.
Shipping might kill the deal to the US, but I am in the UK and it was dead cheap compared to shipping something here from the US. All in all, I highly recommend it as fairing choices are limited for the dual headlights on the Fat Bob.
Shipping might kill the deal to the US, but I am in the UK and it was dead cheap compared to shipping something here from the US. All in all, I highly recommend it as fairing choices are limited for the dual headlights on the Fat Bob.
Maybe I contact Phil and ask price for that.
#97
H-D 1/4 with Kuryakan clamps for 49mm tubes. As for the brackets that comes with the fairing , I decided to machine some stepped washers from solid aluminum bar stock for the backside of the bracket that fit into the keyhole type slots and bought some machined some flat washers for the front from a machinist on ebay made to my specs. I wanted aluminum so they can be anodized later if I choose. I ordered some spacers from McMaster Carr and machined them to fit between the fork brackets and the brackets that are mounted to the fairing itself. Anyway here are a few pics and again, sorry for my terrible camera skills.
Attachment 525025
Attachment 525026
Attachment 525027
Attachment 525028
Attachment 525029
Attachment 525025
Attachment 525026
Attachment 525027
Attachment 525028
Attachment 525029
Last edited by soldierbot; 04-02-2021 at 07:46 AM.
The following 2 users liked this post by fatmanontwowheels:
HighonHarley (11-26-2017),
Tmac73 (10-11-2020)
#99
The following users liked this post:
Proline1969 (12-12-2016)
#100
I just received my fairing yesterday. The question I have for you guys.....wiring.
I would like to tie into the ignition switch but I have never pulled the cover off on my 08 Fat Bob.
Can someone please help me with which wire to tap into so that my stereo will go off with the ignition switch?
Thanks Guys.
I would like to tie into the ignition switch but I have never pulled the cover off on my 08 Fat Bob.
Can someone please help me with which wire to tap into so that my stereo will go off with the ignition switch?
Thanks Guys.