Dyna Glide ModelsSuper Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
I am in the midst of lucky Dave 13 inch bar install on the 16 fxdls and I removed the gas tank during the process. Accidently ripe out the molex plug under the fuel tank. There are 3 wires coming from the fuel tank black orange yellow. And 3 wires on the bike blue white and grey/green. I need to figure out which order to put the tank wires back into the molex plug. Anyone have a clue? All the dealers in my area don't have the manual.
That looks sweet. Got any problems with scraping the pipes on right angle turns?
That's the thing i'm actually most concerned about, because of my sporty riding style on the Dyna.
That looks sweet. Got any problems with scraping the pipes on right angle turns?
That's the thing i'm actually most concerned about, because of my sporty riding style on the Dyna.
The RR3 does sit a bit lower than my RR Mega. I can ride the edges of the tire, and not scrape. There are a few guys here with the RR3, that have not reported any contact though, with standard shocks
259 cams. I can't tell you if it scrapes yet because my wife followed me home from picking it up.Whether it scrapes or not, I plan on some 12.5s at some point because I scrape pegs usually at least once a day.
BTW the pipe sounds like a Thunderheader in my opinion.
259 cams. I can't tell you if it scrapes yet because my wife followed me home from picking it up.Whether it scrapes or not, I plan on some 12.5s at some point because I scrape pegs usually at least once a day.
BTW the pipe sounds like a Thunderheader in my opinion.
Gotcha. I was going back and forth between the 259s, and the 585s when I did the cam swap.
Congrats man, can't wait to hear how that engine comes together for you after you get some miles on her
I have scraped my pegs on both sides but not my RR3. I upgraded pegs when I bought the bike and they don't drop down like the stockers did. So you can lean pretty far witbout worry of the pipe touching.