2007 fxdl dash help
 

Hi all,
I'm currently working on relocating my idiot lights for fxdl and all went well except.. putting the dash back on 😖

The dash mounts need bent out to fit...

Does ANYONE have ACTUAL experience moving around the dash mount? If so.. input is appreciated!

This is final step and dont wna f it up hurrying for no reason.

C'mon lights dont make me look like one 😭

-RG
https://cimg7.ibsrv.net/gimg/www.hdf...711c57dfd9.jpg

Why didn't you route the wiring through the cutout at the end of the dash?

@Jay Guild I did, I just set it on bike for a quick pic to show ppl what I was working on. I also have the rubber console trim that I'm gna put on before its bolted. Wouldnt have the wire sticking out side when its bolted lmao 🤣🤣

RG, where did you get the dash that has a place for the idiot lights? I soo want to lose the eyebrow over my 02 FXDL headlight and remount the light.

@tygr1 I cut and shaped/sanded it w/ a dremel. Saw a old post talking about it. Went for it.

That is very cool!

What do you mean "The dash mounts need bent out to fit... " They don't have enough room between them to fit the lights?

@Jay Guild yeah since the mounts bend in a bit. See pics.
https://cimg4.ibsrv.net/gimg/www.hdf...4ef1d1c1d2.jpg
https://cimg5.ibsrv.net/gimg/www.hdf...f6d5f3fb77.jpg

I'm asking if there is a specific way to go about it or has someone has done something similar. Possibly have drilled out the clip fittings to gain some more room? I dont wna bust the bracket rounding third.

Leme kno!

-RG

Don't worry about putting people's screen names in responses. We'll know who you're talking to. When you tag people by putting in their screen names it also sends a private message and it can be a bit annoying.