Lets see your winter mods
Ok its been along expensive winter for alot of us. I know some of you guys still have some winter left but its coming to an end for alot of us. Lets see some before and after pictures with a list of just this winters mods.
This makes me kind of scared of next winter lol Mine C&C seat 07 FXDSE Bars with a tach D&D Fat Cat/PCV/SE Breather Street Bob shocks Chrome Strut covers Mirrors Chrome Midpeg brackets/passenger pegs added Chrome fuel cap/LED fuel gauge Chrome switch caps Chrome dipstick Hot Toppers Se plug wires LED Taillight Chrome coil cover/electriacl box strap Probally forgot some Picture taken in october http://i4.photobucket.com/albums/y10...erGlide035.jpg As it sits http://i4.photobucket.com/albums/y10...erglide127.jpg http://i4.photobucket.com/albums/y10...erglide128.jpg |
did lots of stuff this winter.
beforehttp://i432.photobucket.com/albums/q...9/Image018.jpg afterhttp://i432.photobucket.com/albums/q...pping_0061.jpg |
3 Attachment(s)
Really like that orange on yours dpriest, wouldn't know it was the same bike with what you have done nice job.
bbreck I really dig that 2:1 exhaust. Nice clean bike you have there. I made a post with what I was doing over the winter. Springer front end, softail rear bobbed fender cut and welded to fit my 06 WG, new rear lamp for now custom rear fender, modded the fuel tank to give clearance for new springer tripple trees and a fabricated lift to the tank. Full pics list is here https://www.hdforums.com/forum/dyna-...-it-comes.html . Picture posted here without springer is the before pic and the 2 with springer are the after winter. Still not fully finished but I am riding it now and finishing as time permits. |
Here are my mods this past winter:
|
I was kinda busy:
FXDXT shocks Works front fork kit Windvest True Track Metzeler ME880's Relocated front signals Superbrace HD dual front brake kit with EBC sintered pads HD tool box powered to charge a cellphone Clocks4Bikes steering nut clock And, I have a MicroTach and a Nelson Rigg sissy bar bag on order. Picture is a bit outdated though. http://i186.photobucket.com/albums/x...y/IMG_3628.jpg |
4 Attachment(s)
My Winter Mods- Lowered front 2 “, rear 2.5”, a 21 “ front DNA wheel 60 spoke, rear 18” 60 spoke wheel. Metzler front and rear (200mm) Metzler, custom rear fender, side mounting licence plate, custom led brake light and indicators. Wide glide front end, arlin ness mirrors, lots of powder coating…..still need to paint fender and make a custom dash.
|
I've done alot of sh** over the winter, but to be honest I just do sh** through out the year when I get extra money! LOL
|
I did a few changes, not done yet but it is rideable at this point.
Here's before.... http://i516.photobucket.com/albums/u.../bwbsigpic.jpg Then it got the Fat Boy front end, smoothed Heritage front fender, Street Bob tank and console with the switch reolcated to it (not installed yet), Street Glide rear fender, Fat Boy floor boards, Deluxe bars, headlight nacelle and Heritage light bar. The rear wheel is a laced Dyna unit and the front is from a Heritage. Almost forgot the Fat Bob rear shocks Kury rear turnsignals for a touring bike with the plate mounted below the bar. I also added Andrews 26H cams, SE air cleaner, Cobra dragsters and a PC3. Just needs a paint job and assembled with the new sheet metal (running the stock rear, tank and no front fender for now). New pipes: http://i516.photobucket.com/albums/u...r/GEDC0025.jpg Fender after lots of welding and smoothing: http://i516.photobucket.com/albums/u...r/100_3007.jpg The basic idea: http://i516.photobucket.com/albums/u...r/100_2833.jpg |
Originally Posted by ackman1968
(Post 4820742)
I did a few changes, not done yet but it is rideable at this point.
Here's before.... http://i516.photobucket.com/albums/u.../bwbsigpic.jpg Then it got the Fat Boy front end, smoothed Heritage front fender, Street Bob tank and console with the switch reolcated to it (not installed yet), Street Glide rear fender, Fat Boy floor boards, Deluxe bars, headlight nacelle and Heritage light bar. The rear wheel is a laced Dyna unit and the front is from a Heritage. Almost forgot the Fat Bob rear shocks Kury rear turnsignals for a touring bike with the plate mounted below the bar. I also added Andrews 26H cams, SE air cleaner, Cobra dragsters and a PC3. Just needs a paint job and assembled with the new sheet metal (running the stock rear, tank and no front fender for now). New pipes: http://i516.photobucket.com/albums/u...r/GEDC0025.jpg Fender after lots of welding and smoothing: http://i516.photobucket.com/albums/u...r/100_3007.jpg The basic idea: http://i516.photobucket.com/albums/u...r/100_2833.jpg |
Got some FXD mags and had um powdered black........that's it.
http://img235.imageshack.us/img235/8503/img1968.jpg http://img235.imageshack.us/img235/8600/img1967.jpg http://img235.imageshack.us/img235/5049/img1966.jpg New winter mod to myself........ink on inside of left bicep. http://img512.imageshack.us/img512/6596/weldmoney.jpg |
All times are GMT -5. The time now is 03:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands