Latest parts slapped on the glide
#1
Latest parts slapped on the glide
I’m going to do a continuation of this thread whenever I do any more mods to the glide, instead of starting a new thread each time.
Just some minor stuff I've done lately.
3" Tank lift,
2.50" Bar lift, I wanted alot of tank lift but I had to make some spacers to raise the risers on my bars to keep the controls out of the tank. Spun these on the lathe out of cold rolled 1.5" steel.
1" drop in the rear, used lowering blocks off of the Bay.
Now what to do with the friggin turn signals.
Starting to look like a different bike, I KNOW shes dirty in the pics and I need to mow the damn lawn too... Hopefully have time for both this weekend.
Just some minor stuff I've done lately.
3" Tank lift,
2.50" Bar lift, I wanted alot of tank lift but I had to make some spacers to raise the risers on my bars to keep the controls out of the tank. Spun these on the lathe out of cold rolled 1.5" steel.
1" drop in the rear, used lowering blocks off of the Bay.
Now what to do with the friggin turn signals.
Starting to look like a different bike, I KNOW shes dirty in the pics and I need to mow the damn lawn too... Hopefully have time for both this weekend.
Last edited by scottyd; 07-01-2010 at 07:10 PM.
#3
#5
I built it using the stock head pipes you can see how here.
https://www.hdforums.com/forum/dyna-...actory+exhaust
Think Id like to just ditch the signals...
https://www.hdforums.com/forum/dyna-...actory+exhaust
Think Id like to just ditch the signals...
#7
Trending Topics
#9
Agreed ...check out these, im about to place an order for a set and powder coat them black....http://www.pro-one.com/401720_Turn_S...r_p/401720.htm