12" Outlawz on Street Bob
#21
04-05-2014, 06:23 AM
New to HD Forums, I have a 2006 FXDB and I am doing research for new bars and love Wild 1 Outlawz. My stock bars measure 10" from the clamps to the top of the bend in the bars. Wild 1's says I could stretch the cables for 12" bars and would love to put them on but was wondering if you had to do any extensions to your wiring. I don't want to buy 12's and then have to add on wiring fir 2". Your bike looks great, I am doing some similar mods.
- Dan
#22
04-07-2014, 08:23 AM
#24
04-07-2014, 12:20 PM
That does look good. I'm back and forth between the 10"s and 12"s I'm 5'8"on 2011 Wg. with a C&C fastback which is pretty low. Do you have any profile pics with you on it ? An how tall are you ? I also have Rsd preorders with the Allen bolt adjuster center top. With a 1.5" riser do you think I'll be able to get a Allen wrench in there for adjustments ? Thanks.
#26
04-07-2014, 03:58 PM
That does look good. I'm back and forth between the 10"s and 12"s I'm 5'8"on 2011 Wg. with a C&C fastback which is pretty low. Do you have any profile pics with you on it ? An how tall are you ? I also have Rsd preorders with the Allen bolt adjuster center top. With a 1.5" riser do you think I'll be able to get a Allen wrench in there for adjustments ? Thanks.
As far as clearance on the fork caps, I was running 1" risers (alloy arts) and had to drop the tubes a bit for the bars to clear.
#28
02-24-2017, 06:54 PM
Intermediate
They look graet man. I just installed the 14" outlawz on my wide glide and love them.
I went with the longer Burly cable and wire kit, glad I did for the cables but probably wasn't needed for the wires. Now I have about 7 inches of extra wire piled up in that little hole haha.
I went with the longer Burly cable and wire kit, glad I did for the cables but probably wasn't needed for the wires. Now I have about 7 inches of extra wire piled up in that little hole haha.
Last edited by ryanobrian; 02-24-2017 at 10:11 PM.
#29
02-24-2017, 09:02 PM
Road Master
If you can wait 4 week, I will have my 14s installed and attempt stock cables.
when I measure these 14s I have in my garage, I notice they are really only 2 inches higher than stock SB bars. I think the 12 outlawz sit closer to stock bar height. Every manufacturer measures their bars different. I would say these are shorter 14s. Hence the sit approx 2 inches higher than stock bars. We will see...
when I measure these 14s I have in my garage, I notice they are really only 2 inches higher than stock SB bars. I think the 12 outlawz sit closer to stock bar height. Every manufacturer measures their bars different. I would say these are shorter 14s. Hence the sit approx 2 inches higher than stock bars. We will see...
#30
02-24-2017, 10:14 PM
Intermediate
If you can wait 4 week, I will have my 14s installed and attempt stock cables.
when I measure these 14s I have in my garage, I notice they are really only 2 inches higher than stock SB bars. I think the 12 outlawz sit closer to stock bar height. Every manufacturer measures their bars different. I would say these are shorter 14s. Hence the sit approx 2 inches higher than stock bars. We will see...
when I measure these 14s I have in my garage, I notice they are really only 2 inches higher than stock SB bars. I think the 12 outlawz sit closer to stock bar height. Every manufacturer measures their bars different. I would say these are shorter 14s. Hence the sit approx 2 inches higher than stock bars. We will see...
Thread
Thread Starter
Forum
Replies
Last Post
