Craaaap

 

I found a bearing pulley reasonable price. CLICK HERE
Try to avoid slide hammer bearing pulley, have seen ppl break the cage and drop roller in the crackcase.

 

That's a pretty awesome deployment gift! Hope she stays safe and gets back quickly.

 

You have a good quality tool so if it's already bought then no worries.

Best way to post photos is to get a free photobucket account...then you can just copy and paste the link and the pic shows up here.

 

I hope not...let's hope it works for 2 more bearings and I will be ok! Doing my brother's today!

 

Once your photos are hosted on Photobucket:
1. Click on PIC you want from your Library.
2. Click on the option under Links to share Photo. You want to LEFT click the URL.
3. In your post here, just RIGHT click and PASTE.

Pic will show...here is my puller:

 

Proud to have a brother like you!

 

Family First, right!?

Puller worked just fine...again.

 

Alright here we go!

 

Here's the kit all laid out



And the back end after moving the plate to the axle.





New pistons on. I've heard people have issues with the crank pin retaining clip but it took me less than 39 sec each with only a tiny screwdriver and my thumb



First cylinder back on. I found an it useful to use an old hacksaw blade to compress the rings