FS: D&D 2:2 Pro Pipe XHP Full System, $100 + ship
#1
FS: D&D 2:2 Pro Pipe XHP Full System, $100 + ship
Full info here: http://www.danddexhaust.com/catalog/2005/07/41122s.htm
This system fits 1995-2005 Dynas, according to the D&D site. It has heat shields, baffles and cone billet end caps. I cannot guarantee it will fit on any bike other than the one I used it on, a 2005 FXDC. These pipes are just a bit too loud for my taste.
This system is used but not abused. Used for less than one season, no rash, but a couple small boot scuffs and marks on the heat shields from normal road use. I ride more, polish less, but in my opinion it is in nice used condition. I tried to photograph the imperfections.
There is a couple scratches in the heat shield on the top of the front pipe, right by where the pipe meets the engine, behind the frame downtubes. Also, there is a metal piece that you run a bolt through to hold the two pipes together. This piece broke while I was out riding, and I had it welded back together. The weld isn't pretty, but it holds strong and is totally hidden when the exhaust is installed.
I have no bolts to include with the pipes as my stock bolts were rusty and when I reinstalled the stock exhaust, I used the D&D hardware. You can pick up everything you need at any hardware store.
Pictures:
Video of sound:
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/o_t17yr7q_M&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/o_t17yr7q_M&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
Not sure if that embed works, but here's the link:
http://www.youtube.com/watch?v=o_t17yr7q_M
$100 plus shipping. I am also interested in trading for some tamer slip-ons, like Rush with baffles or Screamin' Eagle, something like that.
Paypal only, or PM or email to talk about a swap.
dhills79@gmail.com
Dan
This system fits 1995-2005 Dynas, according to the D&D site. It has heat shields, baffles and cone billet end caps. I cannot guarantee it will fit on any bike other than the one I used it on, a 2005 FXDC. These pipes are just a bit too loud for my taste.
This system is used but not abused. Used for less than one season, no rash, but a couple small boot scuffs and marks on the heat shields from normal road use. I ride more, polish less, but in my opinion it is in nice used condition. I tried to photograph the imperfections.
There is a couple scratches in the heat shield on the top of the front pipe, right by where the pipe meets the engine, behind the frame downtubes. Also, there is a metal piece that you run a bolt through to hold the two pipes together. This piece broke while I was out riding, and I had it welded back together. The weld isn't pretty, but it holds strong and is totally hidden when the exhaust is installed.
I have no bolts to include with the pipes as my stock bolts were rusty and when I reinstalled the stock exhaust, I used the D&D hardware. You can pick up everything you need at any hardware store.
Pictures:
Video of sound:
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/o_t17yr7q_M&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/o_t17yr7q_M&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
Not sure if that embed works, but here's the link:
http://www.youtube.com/watch?v=o_t17yr7q_M
$100 plus shipping. I am also interested in trading for some tamer slip-ons, like Rush with baffles or Screamin' Eagle, something like that.
Paypal only, or PM or email to talk about a swap.
dhills79@gmail.com
Dan
#7
Thread
Thread Starter
Forum
Replies
Last Post