Help: Turn on Hi Beam, All lights go out
#1
Help: Turn on Hi Beam, All lights go out
Hello.
I built my Harley from the frame up. I used a Thunder Heart Micro Wiring harness.
My problem is, that when I hit the Hi Beam switch, all my lights go out (head/tail, and all turn signals).
However, as long as I keep it on the Low Beam, everything works.
Before I start tearing stuff apart, I'd like to have a few ideas on what might be causing this issue. Your comments are greatly appreciated.
I have a 12-volt system (no ECM computer).
Thanks!
D
I built my Harley from the frame up. I used a Thunder Heart Micro Wiring harness.
My problem is, that when I hit the Hi Beam switch, all my lights go out (head/tail, and all turn signals).
However, as long as I keep it on the Low Beam, everything works.
Before I start tearing stuff apart, I'd like to have a few ideas on what might be causing this issue. Your comments are greatly appreciated.
I have a 12-volt system (no ECM computer).
Thanks!
D
Thread
Thread Starter
Forum
Replies
Last Post
vtchopperdude
Touring Models
43
02-10-2017 07:40 AM