80 evo Big Bore Kit
#11
Factory Carb is a good one . If you are running those pipes with baffles out and nothing done to jets put the baffles back in. Bike may be loud but it is stealing power from you.
#12
The stock header pipes with cross over work very well. With some tapered turbo mufflers like those made by khromewerks. Had that combo on my last evo and performed way better than mates using vance and ***** pipes and similar. Sounded nice and deep too and not obnoxiously loud and raspy
#13
Carb has been jetted for baffles to be out, id like to have a set of pipes that performs an is pretty loud
#14
#15
#16
A Thunderheader is a loud performer.
Bored to 83", Wood 6 with the proper compression, and a good set of heads, power will be outstanding.
Scott
Bored to 83", Wood 6 with the proper compression, and a good set of heads, power will be outstanding.
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
#17
#18
#20
Join Date: Jan 2015
Location: Sandy Eggo's North County
Posts: 14,691
Received 5,507 Likes
on
2,995 Posts