King Spoke (Fat Spoke) Wheels by Ultima
#21
I don't know that this is the best way, but it's all that comes to mind short of removing the wheels for a visual inspection.
The following users liked this post:
Iron lHorse (01-07-2020)
#26
Join Date: Jan 2011
Location: Haslet Texas
Posts: 20,999
Likes: 0
Received 4,317 Likes
on
1,946 Posts
#27
Bikerlaw posted this in the softail section in regard to the same question and it looks like he's right:
With luck the Ultima King Spoke is right around the corner for the Twin Cams. I just saw on ebay what looks like a test wheel for the 1 inch bearings. It only comes in one size..... the wrong size, but I "suspect" if it works out they will probably start lacing a bunch of wheel sizes to that hub and the fat spokes will be available at a reasonable price for everyone,
http://www.ebay.com/itm/18-X-8-50-CH...3c890c&vxp=mtr
.
http://www.ebay.com/itm/18-X-8-50-CH...3c890c&vxp=mtr
.
#28
None! I now have over 2500 miles on them and no leaks whatsoever, no loose spokes or bearing problems either. They ride perfectly as well, and I never even balanced them. The shop that mounted the tires said they were already very well balanced. I honestly don't expect any negative issues with them at this point, but I'll keep checking. I'm pretty well convinced that these are bad a$$ wheels at a great price.
#30